ENGLISH 
Español
Hospira Lifecare PCA
24-Hour QuotesPricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications
Hospira Lifecare PCA Features
The Hospira Lifecare PCA was designed to help prevent medication error, with its new feature of an integrated barcode reader. This allows the medical provider a way to verify the drugs and levels of infusion needed for each patient. The Hospira Lifecare also comes with a drug library that is integrated through the barcoding system in the Hospira MedNet software.
- Hospira MedNet Software with customizable drug libraries
- Integral bar code reader for medication identification of prefilled and custom-filled vials with pharmacy-generated bar codes
- Multiple medication rule sets for as many as 18 clinical care areas
- Bar-coded, prefilled medication vials
- Stored protocols for quick, accurate programming of standing orders
- Easy-to-use design based on human factors research
Hospira Lifecare PCA Specifications
Dimensions
- Height: 13 in
- Width: 8 in
- Depth: 6 in
- Weight: 10 lbs with battery
Electrical
- Power Requirements: 100-240 V, 50 – 60 Hz, 50 W
- Power Cord: Hospital-grade AC cord. 10 feet (3 meters) with transparent plug and retainer plate
- Fuses: 0.5 A, 250 V, Slo-Blo
- Battery: One sealed lead acid, rechargeable 8 V battery, internal to the device
- Battery Operation: A fully charged conditioned battery shall provide at least 3 hours of continuous operation from the start of delivery at 5 mL/hr to a dead battery. Operation time is measured from the initial pumping to the LOW BATTERY alarm. <?li>
- Recharge: The battery charges whenever the infusion pump is connected to AC power. After a LOW BATTERY alarm, the battery will recharge to 80% of full capacity within 16 hours.
- Self-Discharge: A fully charged battery will retain a minimum of 20% of the initial charge for six months when the infusion pump is not connected to AC power or is not operating, and is stored at 20° C.
Environment
- Operating: 41° to 104° F (5° to 40° C) 10% to 90% relative humidity
- Transporting and Storage: -4° to 140° F (-20° to 60° C) 10% to 90% relative humidity
- Atmospheric Pressure: 0 – 10,000 feet (0 – 3000 meters) or equivalent atmospheric pressure
- Relative Humidity: 10 – 90% non-condensing up to 104° F (40° C); maximum of 15% non-condensing above 104° F (40° C)
Occlusion Alarm and Limits
- Backpressure Range: 10 to 20 psi
Modes
- PCA Only: Approximately 1 mL in 35 seconds
- Continuous Only: Variable from 0.1 x concentration to 20 x concentration (mg/hr or mcg/hr)
- PCA + Continuous: Variable from 0.1 x concentration to 20 x concentration (mg/hr or mcg/hr)
- Lockout Interval Range: 5 to 120 minutes in one-minute increments
Promote Safe Delivery
- Integrated bar code reader confirms drug and concentration
- Pre-filled, bar-coded medication vials with colored labels or custom-filled vials with pharmacy-generated barcodes
- Confirmation screens to add an extra level of safety
Enhance Workflow Efficiency
- Robust wireless capabilities enable remote drug library updates
- Easy-to-read keypad
- Dedicated device and unique design – the LifeCare PCA is intentionally designed to stand out from general infusion devices to help reduce the risk of user confusion and line mix-ups
Secure Delivery
- Key key-driven locking system adds security on several levels
- Pole clamp locks to IV pole
- Medication door lock
- Programming lock-out
Easy Upgrade to Include Hospira MedNet™ Safety Software
- Mandatory drug library compliance with the addition of Hospira MedNet safety software
- Customized drug libraries for up to 18 clinical care areas
- Up to 25 medications per clinical care area
- Hard and soft limits for each medication
Refurbished The Hospira Lifecare PCA Infusion Pump
Soma Tech Intl offers the Hospira Lifecare PCA Infusion Pumps up to 50% below OEM prices with the same service and warranty as new. The Hospira Lifecare PCA is not only technically refurbished but also cosmetically refurbished to make it work and look new. When the refurbishing process starts on the Hospira Lifecare PCA, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on infusion pumps. If necessary, parts are replaced to make sure that all aspects of the Hospira Lifecare PCA are to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Hospira Lifecare PCA is working like new it undergoes a special cosmetic restoration process. The Hospira Lifecare PCA is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Hospira Lifecare PCA is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished Hospira Lifecare PCA infusion pump contact soma at Soma@SomaTechnology.com or call us at 1-800-GET-SOMA.
Soma Tech Intl is actively looking to purchase a Hospira Lifecare PCA If you or your facility is looking to sell your Hospira Lifecare PCA, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Hospira Lifecare PCA takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!
