1.800.GET.SOMA (1.800.438.7662)

Hospira Plum A+3

click on thumbnail to zoom

Other products by Abbott
Other products in Infusion Pumps

Specifications

Hospira Plum A+3 Features

The Hospira Plum A+ 3 is a Tripple channel infusion pump, where multiple infusion lines can be run at once. The Hospira Plum comes with the Hospira MedNet safety software and barcode point-of-care system. this allows clinicians to simultaneously deliver infusions or in a specific tiered sequence. The plum A+ is a wireless-enabled system, making it easier for healthcare workers to provide the right dosing requirements needed to ERs, ICUs, and Oncology centers.

Deliver infusions with confidence with the unique PlumSet™ technology
Automated second-line delivery — eliminates the need to raise and lower infusion containers, improving ease-of-use and efficiency
Concurrent delivery of 2 medications through a single patient line
Air-in-Line detection and elimination — air trap captures up to 2 mLs of air
Accumulated air can be removed by automated back-priming without disconnecting the patient line, reducing the risk of contamination
Deliver secondary infusions via IV container or syringe
Reliable performance, steady, consistent and proven
One integrated system works across the entire spectrum of clinical care
Single channel (2 concurrent medications) or triple channel (6 concurrent medications) models available
Choose from a variety of programming options:
Automated piggyback and concurrent delivery
Programmable standby settings
Multistep delivery
Loading dose automation
Programmable delayed starts

Hospira Plum A+3 Specifications

Dimension

Hight: 19 in
width: 15 in
Depth: 14 in
weight: 28 lbs (with 3 batteries)

Electrical

Power Requirement: 120 V~, 50 - 60 HZ, 120 VA
Fuses: F1, F2, 250~, 0.5 A ( internal)
Power Cord: Hospital-grade AC cord. 10 ft long, with transparent plug and retainer plate
Battery: Three sealed, lead-acid, rechargeable 6 V batteries, internal to device.
Battery Life: With a new fully charged battery, the infuser shall operate for a minimum of six hours at 125 mL/hr or less, or deliver 500 mL at 126 mL/hr or greater on one line.
Recharge: The batteries charge whenever the pump(s) is connected to AC power. The recharge time is approximately six hours with the device operating at 125 mL/hr on one line.
Leakage: Meets ANSI/AAMI ES1-1993 standard: Safe Current Limits for Electro-medical Apparatus.
Circuitry Ratings:

Voltage-30 VDC Max
Current- 0.25 Amps Max
Contact Rating- 3 Watts Max

Environment

Operating Temperature: 5° to 40° C
Storage Temperature: -20° to 60° C
Atmospheric Pressure: 0 - 10,000 feet (0 - 3,000m) or equivalent pressure
Relative Humidity: 10 - 90% (40° C Max)

General

Volume Range: 0.1 to 99.9 mL (in 0.1 mL increments), 100 to 9999 mL (in mL increments)
Delivery Rate Accuracy: ± 5% (1-999 mL/hr), ± 10% (0.1-0.9 mL/hr)
Delivery Rates:

Primary: 0.1 mL/hr Minimum, 999 mL/hr Maximum
Secondary: 0.1 mL/hr Minimum, 999 mL/hr Maximum
Concurrent: 0.5 mL (per line) Minimum, 500 mL/hr (cumulative) Maximum

Delivery Units: mL/hr, mcg/kg/min, mcg/min, mcg/kg/hr, cg/hr, mg/min, mg/kg/hr, mg/hr, ng/kg/min, g/hr, mEq/hr, Million units/hr, units/min, units/hr, units/kg/hr, units/kg/min, mmol/min, mmol/hr
System Alarms: Air-in-Line, Air-in-Line Backpriming, Low Battery, Occlusion, Turn to Run, Flow Detector, VTBI Complete or Dose End
Occlusion Alarm Pressure: 1-15 psig (default 6 psig)
KVO Rate: 1.0 mL/hr or the last primary delivery rate, whichever is less

General Information About IV Therapy

IV Therapy

IV therapy is used to deliver by infusion, fluids, medication, or nutrients to patients.
There are two main types of administration of infusion, volumetric and syringe/PCA.

IV Therapy-Volumetric

These pumps are used when the accuracy of fluid volume to be infused is critical such as in the case of medications used for infusion of drugs for circulatory support.
Volumetric pumps deliver a given volume of fluid per unit time measured in mL/hour.
Volumetric pumps can be single or multi channel. Both types allow for the administration of more than one fluid at a time. Single channel employs a piggyback method while multi-channel uses separate tubing set up for the administration of multiple medications or fluids

IV Therapy-Syringe

Syringe pumps are used to administer small volumes of fluids or medications. (1 mL to 60 mL syringe)
Syringe pumps are an effective way to deliver medication with precision while reducing the chance of human error if the medication were to be administered by a member of the medical staff* (of course human error can occur when inputting data or choosing dose rate over time)
Like volumetric pumps, syringe pumps can be programmed to deliver the medication over a predetermined time

Refurbished of The Hospira Plum A+ 3 Infusion Pump

Soma Tech Intl offers the Hospira Plum A+ 3 Infusion Pumps up to 50% below OEM prices with the same service and warranty as new.The Hospira Plum A+ 3 is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Hospira Plum A+ 3, it is carefully inspected and tested by our own in-house biomedical engineers that are highly skilled and certified to work on infusion pumps. If necessary, parts are replaced to make sure that all aspects of the Hospira Plum A+ 3 to the original engineering manufacturer specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Hospira Plum A+ 3 is working like new it undergoes a special cosmetic restoration process. The Hospira Plum A+ 3 is cleaned, minor scratches and dents are repaired, it's painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Hospira Plum A+ 3 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Hospira Plum A+ 3 infusion pump contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is actively looking to purchase a Hospira Plum A+ 3 If you or your facility is looking to sell your Hospira Plum A+ 3, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Hospira Plum A+ 3 takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain space for new equipment, or if you are looking to upgrade your current equipment, contact Soma Techn Intl's purchasing department at [email protected] or send us a message on our Sell to Soma website.

Questions about our Infusion Pumps?

Soma Technology, Inc offers a wide range of infusion pumps. If you have any questions about any of our infusion pumps or need a quick quote, call 1-800-GET-SOMA and one of our knowledgeable sales representatives will help you.