Smiths Level 1 H-1000 Features
The Smith Medical Level 1 H-1000 is a fluid warmer that offers rapid in-line warming of I.V. fluids that are administered to the patient. The Fluid warmer can provide a fast flow of warming fluid to re-warm patients during surgery. The H-1000 uses disposable sets that allow blood and I.V. fluids to flow through the system and deliver the liquids around 40°C.
- The H-1000 employs a safe circulating water heating system, inherently free of any “hotspots.” The primary temperature control circuit sets the circulating water bath to a temperature of approximately 42 °C for efficient heat exchange and maximum fluid warming.
- The Sturdy Design of the H-1000 offers a compact custom I.V. pole mount setup.
- Disposable Sets employ a unique “hands-off” Gas Vent which vents micro-bubbles of gas that are always released from fluids as they are warmed.
Smiths Level 1 H-1000 Specifications
Dimensions
- Length: 48” (122cm)
- Width: 13” (33cm)
- Depth: 10” (26cm)
- Weight: 20 Pounds (9kg)
- Distilled Water Capacity: 0.3 Gal (1.4 L)
- Air Source Pressure: 300 mmHg
Power
- Input Voltage: 100 VAC
- Operating Frequency: 50-60Hz
- Operating Current: 12Amps
- Auxiliary Outlet: 1.5Amps
- Tempreature Set Point: 41.7? ± 0.3?
- Over Tempurature Set Point: 43.9? ± 0.1?
Refurbished Smiths Level 1 H-1000 Fluid Warmer
Soma Tech Intl offers the Smiths Level 1 H-1000 Fluid Warmer up to 50% below OEM prices with the same service and warranty as new. The Smiths Medical Fluid Warmer is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the H-1000, it is carefully inspected and tested by our in-house biomedical engineers who are highly skilled and certified to work on fluid warmers If necessary, parts are replaced to make sure that all aspects of the fluid warmer to the original engineering manufacturer specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Level 1 H-1000 is working like new it undergoes a special cosmetic restoration process. The fluid warmer is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment they sell. Before the Smiths Medical Level 1 H-100 Fluid warmer is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished fluid warmers units contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is actively looking to purchase Smith’s H-1000 fluid warmers, If you or your facility is looking to sell your fluid warming systems, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Smiths H-1000 removes the middleman in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and ensures your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain space for new equipment, or if you are looking to upgrade your current equipment, contact Soma Tech Intl’s purchasing department at [email protected]. If you have medical equipment you would like to sell to Soma, send us a message here!
