Axia TRIA Touch Screen

The Axia Tria is a patient monitor that can measure capnography (EtCO2), Rapid Temperature, non-invasive blood pressure and SpO2. Axia Tria comes with technology that can measure End-tidal CO2 at 50/ml per second to get the most accurate reading. The patient monitoring system can be used on both intubated and non-intubated patients. The Tria comes with a bright 5-inch color touch screen and a simple, easy-to-use interface. With a lithium-ion battery and a portable battery backup, the Monitoring system can be used for a variety of areas to monitor the vital signs of the patient from pain management, procedure rooms, spot-checking, and even as a bedside monitor.

• Touch screen
• Simple interface
• Intuitive
• Long life Lithium Battery
• Mobile (Backup battery powered)
• Portable (weight 1.71 lbs)
• Color waveforms
• Applications: Neonatal, pediatric and adult patients

Dimensions

• Size: 8 x 4.5 x 4 (HxWxD inches)
• Weight: 2.5 LBS

Performance Specifications

• Display: 5.0 inch (Diagonal) color TFT
• Resolution: 800 × 3(RGB) × 480
• Trace: 2 waveforms
• Waveforms: PLETH, ETCO2
• Indicator: Alarm Indicator, Power indicator, Pulse beep and alarm sound
• Trend time: From 1 to 72 hours

SPO2

• ASpO2: Anti-motion SpO2
• SpO2% Range: 0 ~ 100%
• SpO2 Accuracy: ±2% (70 ~ 100%,non-motion), ±3% (70 ~ 100%, motion)
• Pulse Rate Range: 30-250 bpm
• Pulse Rate Accuracy: ±2 bpm(non-motion), ±3 bpm (motion)
• Alarm Upper-lower Limit: Upper limit 70 ~ 100%, Lower limit 70 ~ 100% bpm (motion)
• SpO2 Probe:Red light LED wavelength: 660nm±5nm, Infrared light LED wavelength: 940nm±10nm
• Standards: Meets performance of EN ISO 9919:2015

NIBP

• Measuring Technology: Automatic oscillating measurement
• Cuff Inflating: <30s (0 ~ 300 mmH, standard adult cuff)
• Measuring Period: AVE<40s
• Mode: Manual, Auto, STAT
• in AUTO Mode: 2 min ~ 4 hrs
• Pulse Rate Range: 30 bpm ~ 250 bpm
• Measuring Range: Adult/Pediatric Mode, SYS: 40 ~ 250 (mmHg),DIA: 15 ~ 200 (mmHg), Neonatal Mode, SYS: 40 ~ 135 (mmHg), DIA: 15 ~ 100 (mmHg)
• Resolution:1mmHg
• Pressure Accuracy: Maximum Mean error: ±5mmHg
• Deviation: 8mmHg
• Overpressure Protection: Adult Mode: 280(mmHg), Neonatal Mode: 150 (mmHg)
• Alarm Limit: SYS: 50 ~ 240 mmHg, DIA: 15 ~ 180 mmHg
• Standards: Meets performance standards ANSI/AAMI SP10:2002

ETCO2(OPTION)

• Mode of Sampling: Sidestream or Mainstream
• Principle of Operation: Non-dispersive infrared (NDIR) single beam optics, dual wavelength, no moving parts.
• CO2 measurement Range: 0 to 150 mmHg (0 to 19.7%, 0 to 20 kPa)
• CO2 Calculation Method: BTPS (Body Temperature Pressure Saturated)
• CO2 Resolution: 0.1mmHg (0-69mmHg),0.25mmHg (70-150mmHg)
• CO2 Accuracy: 0 ~ 40 mmHg ± 2 mmHg, 41 ~ 70 mmHg ± 5% of reading, 71 ~ 100 mmHg ± 8% of reading, 101 ~ 150 mmHg ± 10% of reading, Above 80 breath per minute ± 12%of reading
• Sampling rate:100Hz
• Respiration Rate: 2 ~ 150 bpm
• Respiration Rate accuracy: ±1 breath
• Response Time: <3 seconds -includes transport time and rise time
• Measurement Range: 3 ~ 50 mmHg
• Standards: Meets performance standards of ISO/ FDIS 21647:2004 (E)

Networking

• Wired Networking:Industry standard: 802.11b/g wired network, Frequency Range: 2.412 ~ 2.484 GHz Connected bedside number: Up to 16 bedside monitors
• Wireless Networking: Up to 100m indoors, Industry standard 802.11b/g wireless Supports TCP/IP and UDP/IP Protocols

Power

• Source: External AC power or internal battery
• AC Power: 100 ~ 240VAC, 50/60Hz, 150VA
• Battery: Built-in and lithium Ion rechargeable, 12.6V/5Ah
• Charge Time: 8 hours
• Operating Time: 3 hours

Fuse

• 3.15A/250V

LCD Specifications

• Display Type: TFT color LCD
• Size (diagonal): 5.0 inch
• Active Area: 152.4 (W) × 91.44 (H) mm
• Color arrangement: RGB-stripe
• Dot pitch: 0.0635(W) × 0.1905(H) mm
• Display Mode: Normally white, Transmissive
• Interface: Digital (TTL)
• Surface: Treatment: Anti-Glare

Touchscreen Specifications

• Type: Four-Wire Analog Resistive Touch Panel
• Input Mode: Stylus Pen or Finger
• Connector:FPC
• Insulation resistance: 25MΩ
• : 7VDC
• Chattering: 10ms
• Transparency: 80%
• Surface hardness: 3H
• Durability-surface scratching: Write 100,000
• Active force: 80gf
• Knock Test: 1,000,000 times

Rapid Temperature (Option)

• Measurement Range: 30°C to 43°C (86°F to 109°F)
• Typical Measurement Times: Oral (Quick Mode): 3-5 seconds (non-fever temps)
• (after insertion into measurement site): 8-10 seconds (fever temps), Oral (Standard Mode): 6-10 seconds Axillary Mode: 8-12, Rectal Mode: 10-14 seconds, Direct Mode (All Sites): 60-120 seconds
• Pulse Timer: 60 Second count with a “beep” at 15 seconds, 2 “beeps” at 30 seconds, 1 “beep” at 45 seconds, and 2 “beeps”at 60 seconds
• Patient Accuracy: A Standard Prediction Mode reading and a Direct Mode reading will differ by less than ±0.2°C (±0.4°F) on 98% of tested patients
• Batteries: Four “AA” Required, Standard IEC package size. Alkaline --1.5 Volt, Approx. 6000 temperature readings
• Standards: Meets performance standards of EN 12470-3:2000 and ASTM E1112:2006

Safety

• Meet the requirement of EN60601 series, CE marking according to MDD93/42/EEC
• Type of Protection: Class I (on AC power) , internally powered equipment (on battery power):Per I.E.C. 60601-1, clause 2.2.4
• Degree of Protection: Type BF, defibrillator-proof CF - Applied part
• Sterilization or Disinfection methods: 70% isopropyl alcohol solution or a non staining disinfectant. Equipment not suitable for use in the Presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide
• Operation Mode: Continuous
• Protection Against Ingress of Liquids: IPXO