GE Dash 2500 Features
The GE Dash 2500 is a portable intra-hospital patient monitor. It can monitor adult, pediatric, and neonatal patients’ vital signs in a wide variety of subacute care environments like hospitals and other medical facilities. The Dash 2500 can measure non-invasive blood pressure, heart/pulse rate, respiration rate, ECG, temperature, and SpO2. This GE patient monitor can run on battery or AC power and be mounted in a variety of ways to fit your facility’s needs. It has a bright color 10.4-inch display with an intuitive and highly configurable user interface. A total of 5 waveforms can be displayed on the screen. Another patient monitor is the GE Dash 3000.
- Battery run time of more than 180 minutes.
- Weighs in at 12 lbs.
- Rugged and ergonomic design.
- Compatible with CARESCAPE CIC Pro
GE Dash 2500 Specifications
Dimensions
- Height: 8.7 in ( 22 cm)
- Depth: 6.7in (17 cm)
- width: 14.1 in ( 35.8 cm)
- Weight: 12 lbs ( 5.5 kg)
Environmental
- Operating Temperature: 5°C to 40°C (41°F to 104°F)
- Storage Temperature: -20°C to 60°C (-4°F to 140°F)
- Operating Humidity: 5 to 95% noncondensing
- Storage Humidity: 5 to 95% noncondensing
- Operating Atmospheric Pressure: 700 to 1060 hPa (525 to 795 mmHg)
- Storage Atmospheric Pressure: 500 to 1060 hPa (375 to 795 mmHg)
Electrical
- AC input voltage: 100 to 240 V
- AC input frequency: 50/60 HZ
- AC input power: 120 VA
- Internal battery: 8.4 V nickel-metal-hydride (NiMH)
- Power supply: The Dash 2500 Patient Monitor can be powered from the internal battery or AC power
Battery
- Capacity: 8.4 V; 7.0 Amp-hr
- Battery life: Greater than 180 minutes using the fully charged internal battery (NIBP: five min auto cycle with adult cuff. ECG, RESP, SpO2: Active. TEMP: predictive mode. Printer: printing two waveforms for one min every 20 min at 25 mm/sec)
- Charge time:
- 4 hours maximum with the Monitor switched OFF
- 8 hours maximum with the Monitor switched ON
Heart Rate/Pulse
Electrocardiography
- Heart rate accuracy: 30 to 300 bpm, ± 3 bpm or 3% of reading, whichever is greater
NELLCOR SpO2
- Range: 20 to 250 bpm
- Accuracy and tolerance: 20 to 250 bpm ±3 digits
- Low perfusion: 20 to 250 bpm ±3 digits
MASIMO SpO2
- Range: 25 to 240 bpm
- Accuracy and motion tolerance
- Without motion: 25 to 240 bpm ±3 digits
- With motion: normal physiologic range, 25 to 240 bpm ±5 digits
Noninvasive Blood Pressure (NIBP)
- Adult/pediatric range: 30 to 200 bpm
- Neonate range: 30 to 220 bpm
- Accuracy: ± 3.5%
ECG
-
- Leads available
- 3-electrode configuration: I, II, III
- 5-electrode configuration: I, II, III, aVR, aVL, aVF, and VA
- Heart rate accuracy: 30 to 300 bpm, ± 3 bpm or 3% of reading, whichever is greater
- Heart rate resolution: 1 bpm
- Bandwidth:
- 0.5 to 40 Hz +1/-6 dB
- 0.05 to 40 Hz +1/-6 dB
- 0.05 to 100 Hz +1/-6 dB
- Standardizing voltage: 1 mV marker
- Common mode rejection: 1 mV RTI or 10 mm p-p max displayed noise allowed with 20 Vrms, 50-60 Hz input
- Input impedance
- Common mode: > 2.5 M? at 10 Hz
- Differential: > 2.5 M? from DC to 60 Hz
- Leads available
</uL
-
-
- 60 Hz tolerance: up to 10 mV
- Pacemaker detection/rejection
- Input voltage range: ± 2 to ± 700 mV
- Lead off sensing current: < 0.1 µA DC signal leads, < 1 µA DC driven lead
-
Refurbished GE Dash 2500 Patient Monitors
Soma Tech Intl offers the GE Dash 2500 patient monitors up to 50% below OEM prices with the same service and warranty as new. The GE Dash 2500 is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the GE patient monitor, it is carefully inspected and tested by our own in-house biomedical engineers that are highly skilled and certified to work on these GE monitors. If necessary, parts are replaced to make sure that all aspects of the Dash 2500 adhere to the original engineering manufacturer specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the GE 2500 is working like new it undergoes a special cosmetic restoration process. It’s cleaned, minor scratches and dents are repaired, painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that is sold. Before the GE Dash 2500 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished GE Dash 2500 patient monitors contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is actively looking to purchase a GE Dash 2500. If you or your facility is looking to sell your GE Dash 2500, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Dash 2500 patient monitor to Soma takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain space for new equipment, or if you are looking to upgrade your current equipment, contact Soma Tech Intl’s purchasing department at [email protected] or send us a message on our </a href=”https://www.somatechnology.com/Sell-to-Soma/” target=”_blank”>Sell to Soma website.
Soma Tech Intl offers a wide range of
patient monitors. If you have any questions about any of our monitors or need a quick quote, call 1-800-GET-SOMA and one of our
knowledgeable sales representatives will help you.
