The Medtronic Covidien Valleylab RapidVac is a smoke evacuation system that captures particulates and adsorbs gases from surgical smoke. The RapidVac smoke evacuator is specifically designed to improve visibility and reduce potential health hazards associated with surgical smoke. It can be used in both open and laparoscopic procedures. This unit is designed with a high suction, high flow rate centrifugal action pump, and features an ultra-quiet motor.
Easy, effective, economical and quiet smoke evacuation
The RapidVac smoke evacuator system is designed to effectively capture and filter surgical smoke to remove odor, particulates, and other potentially hazardous byproducts of electrosurgery procedures.
The RapidVac smoke evacuator system teams up with the ForceTriad energy platform and the Force FX and Force EZ generators. Optional accessories are available to enable other electrosurgical generators to synchronize with the RapidVac™ system.
How does the RapidVAC smoke evacuator deal with the two standard voltages? There are two RapidVAC part numbers, one for each voltage. SE3690 for 110 V and SE3695 for 220 V.
What is the rated decibel level for the RpidVac smoke Evacuator? The maximum decibel in turbo mode is 57.0 dB.
What is the interlink cable, and how does it connect? The interlink cable enables the synchronization of the RapidVac smoke evacuator to a Covidien Energy-based Devices’ generator. The cable directly connects the RapidVac smoke evacuator to a ForceTriad energy platform, Force EZ and Force FX generators. One end of the cable connects to the outlet on the back of the RapidVac smoke evacuator and the other connects to the EKG blanking port on the generator. Once connected, the user must activate the RapidVac+ mode by pressing the button on the front of the RapidVac smoke evacuator. This will ensure that when then ES pencil is activated on the generator the RapidVac smoke evacuator will activate to clear the smoke.
What is the remote switch activator or RSA? For competitive generators and legacy Covidien Energy-based Devices’ generators, a remote switch activator may be necessary to enable synchronization with the RapidVac smoke evacuator.
Can you Describe turbo mode, and how you activate it? Pressing the turbo button increases the maximum suction by 15 percent.
What is RapidVac+ mode? what is it for? RapidVac+ mode should be activated when the interlink cable or the RSA is correctly connected. Doing so enables synchronization of the RapidVac with the generator.
where are the power settings, and can you describe what the various power settings mean? The power settings are located on the left side of the control panel and are understood by looking at the lights that are illuminated during use. The LED goes from 0 to 100 percent power in five increments of 20 percent each. Each light represents a 20 percent increase from the previous light until maximum “standard” power is reached. Activating the turbo button above that light panel increases output by an additional 15 percent.
How do I know how much filter life is remains? The filter life indicator provides a visual indication of the status of the life of the filter in use. Each illuminated LED represents five hours of remaining time on the 25-hour filter.
What is the wrench indicator? The motor powering the RapidVac smoke evacuator has two motor brushes that require regular maintenance every 500 hours. When the smoke evacuator has been in use for 500 hours, the service-required indicator illuminates. Replace the motor brushes as directed in motor brush replacement on pages 4-7 of the User’s Guide. After brush replacement, reset the system by simultaneously depressing the up and down arrow air flow controls until the service required indicator turns off.
How is the filter removed and installed?To remove the filter, depress the beige button at the top on the front of the RapidVac smoke evacuator. This releases the filter and enables easy removal. Pull it straight out.
Soma Tech Intl offers Refurbished Medtronic Covidien Valleylab RapidVac Smoke Evacuation System up to 50% below OEM prices with the same service and warranty as new. The Medtronic Covidien Valleylab RapidVac Smoke EvacuationUnit is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Medtronic Covidien Valleylab RapidVac Smoke Evacuation is carefully inspected and tested by our own in-house biomedical engineers that are highly skilled and certified to work on Medtronic Covidien Valleylab RapidVac Smoke Evacuation Unit . If necessary, parts are replaced to make sure that all aspects of the pump are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Medtronic system is working like new it undergoes a special cosmetic restoration process. The Medtronic Covidien Valleylab RapidVac Smoke Evacuation is cleaned, minor scratches and dents are repaired, it's painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the infant warmer functions and looks like new. Soma Technology is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Medtronic Covidien Valleylab RapidVac Smoke Evacuation is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Medtronic System contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase a Medtronic Covidien Valleylab RapidVac Smoke Evacuation Systems. If you or your facility is looking to sell your Medtronic Covidien Valleylab RapidVac Smoke Evacuation Unit, be sure to contact Soma Technology, Inc. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Medtronic Covidien Valleylab RapidVac Smoke Evacuation System to Soma Technology takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Technology is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Technology also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain floor space for new equipment, or looking to upgrade current equipment, contact Soma Technology’s purchasing department at [email protected] or send us a message on our Sell to Soma website.
Soma Tech Intl offers a wide range of electrosurgical units. If you have any questions about any of our electrosurgical units, electrosurgical generators, or need a quick quote, call 1-800-GET-SOMA and one of our knowledgeable sales representatives will help you.