Stryker 1007 SM104 M-Series Stretcher Features
Stryker’s innovative design for the 1007 (SM-104) M-Series stretcher set a new standard for effective treatment and safe transport. Supremely mobile and user-friendly, the M-series stretchers are perfectly suited for fast-paced and rigorous environments such as the Emergency Department because they help greatly reduce the physical strain on clinicians without sacrificing patient care and comfort. This general-purpose stretcher also has a 700 lb. (317.5kg) weight capacity, an increase from the typical 500lb weight capacity, making it one of the first bariatric stretchers available on the market.
- Thermoformed ABS base with extra capacity storage tray
- Less than 21-inch low height
- Bariatric
- Integrated utility tray
- Litter-mounted oxygen bottle holder
- Integrated transfer board
- Central locking Four-wheel, steel-ring brake system with dual-end brake/steer controls
- Dual side-mounted hydraulic foot controls with unilower pedals
- Retractable Glideaway side rails
- Hands-free Trendelenburg and Reverse Trendelenburg
- Constant descent hydraulics
- Four integrated IV pole receptacles
- 8” Omni surface casters with wheel covers
- Dual pneumatic cylinder backrest
- Stationary foot-end litter
- Fifth-wheel steering mobility
Stryker 1007 SM104 M-Series Stretcher Specifications
General
- Maximum Weight Capacity: 700 lbs (317.5 kg)
- Overall Stretcher Length: 84” (± .5”) (213.3 cm)
- Overall Stretcher Width (siderails raised): 33.5” & 37” (± .5”) 85.1 cm & 93.9 cm<M/li>
- Overall Stretcher width (siderails Lowered): 30.25” & 30.75” (± .5”) 76.8 cm & 78.1 cm
- Minimum/ Maximum Bed Height: 20.75”/34” (± .5”) 52.7 cm / 86.4 cm
- Fowler Angle: 0° to 90° (± 3°)
- Knee Gatch Angle: 0° to 40° (± 1°)
- Trendelenburg/Reverse Trendelenburg: +16°/-16° (± 1°)± 2% of weights above 100 lbs.
- Optional Scale System Environmental Requirements for Operation: 60° F – 80° F
0% – 90% Relative Humidity
Power
- internally Powered
- Ode of Operation: Continuous
- Electromagnetic Interface – product conforms to IEC 60601-1-2:1993 – Class B
- Voltage: 6. o VDC
