ENGLISH 
Español
Alaris IMED Gemini PC-1
24-Hour QuotesPricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications
Alaris IMED Gemini PC-1 Features
The Alaris IMED Gemini PC-1 is a single-channel volumetric infusion pump and controller that provides accurate and automatic infusion of intravenous drugs and fluids. The Gemini PC-1 utilizes peristaltic action in both the pump and controller modes. When in controller mode, it senses the pressure created by the height of the fluid container and uses that pressure as the occlusion pressure limit. If in pump mode, the occlusion pressure limit is preset at about 10 (±2) psi. The infusion rate is selectable from 0.1 mL/hr to 999 mL/hr.
- Can be operated as a pump or controller.
- Secondary (piggyback) infusion can be administered using infusion parameters independent of the primary infusion.
- Infusion rate selectable between 0.1 mL/hr and 999 mL/hr.
- Large easy-to-read display.
Alaris IMED Gemini PC-1 Specifications
Dimensions
- Height: 10.8” (27.5 cm)
- Width: 8.2” (20.6 cm)
- Depth: 6.5” (16.5 cm)
- Weight: 11.3 lbs (5.1 kg)
Rate Selections
- Rate Selections: 0.1 to 999 mL/hr
- Micro: 0.1 to 99.9 mL/hr (in 0.1 mL/hr increments)
- Macro: 1 to 999 mL/hr (in 1 mL/hr increments)
- Volume-to-be-Infused Selections
- Micro: 0.1 to 999.9 mL (in 0.1 mL/hr increments)
- Macro: 1 to 9999 mL (in 1 mL/hr increments)
- KVO: 1 mL/hr if the set rate is 1 mL/hr or above, or actual rate if set at 0.9 mL/hr or below
Occlusion Pressure
- Controller Mode: Container height
- Pump Mode: 10±2 psi for a rate above 30 mL/hr. For rates of 30 mL/hr and below, the occlusion pressure will be less than 10 psi and is rate-dependent (unless locked into 10 psi for all rates.)
Secondary (Piggyback)
- Dual rate programmable
