GE Dash 2000

Quotes in less than 24 hours Download Specifications

GE Dash 2000 Features

The GE Dash 2000 can be used as a standalone or transport patient monitor for adult, pediatric, and neonatal patients. It monitors ECG, NIBP, impedance respiration, SpO2, and temperature. Optionally, it can have a built-in recorder and be able to monitor invasive blood pressure. The Dash 2000 is available in both monochrome and color displays. This GE patient monitor can connect to the GE Marquette Unity Network via ethernet cable. If AC power is interrupted on this Dash monitor, it has an internal battery pack that can last between 2 and 3 hours. GE offers a variety of patient monitors. The GE Dash line of patient monitors includes The GE Dash 2500.

  • 5.8-inch color or monochrome display.
  • Standard ECG leads are I, II, III, V, VL, and VF.
  • Trim knob control with 5 hard keys.
  • 11.5 lbs with battery and recorder.

GE Dash 2000 Patient Monitor Specifications


  • Height: 8.5 in (21.5 mm)
  • Width: 10.2 in (26 cm)
  • Depth: 7.9 in ( 20 cm)
  • Weight: 11.5 lbs (5.32 kg) ( with battery pack and recorder)


  • Size: 5.8″ (16 cm) diagonal
  • Type: Monochrome LCD; optional color LCD
  • Resolution: 320 x 240 pixels
  • Number of Traces: 3
  • Number of Seconds/trace: 3.8 at 25 mm/sec
  • Sweep Speed: 25 mm/sec (with erase bar)
  • Information Window: Display non-real-time information without obstructing the display of real-time information
  • Display Organization: Prioritized by parameter


  • Cooling: Convection
  • Heat Dissipation: 240 BTU/hr
  • Battery: nickel-cadmium (NiCd), 12 V, 2.0-ampere hours
  • Fuses: 100 – 240 VAC: T2.0A, 250 VAC, 5 x 20 mm
  • Design (General): Continuous operation, not protected against the ingress of liquids </li.
  • Battery Operation Time:
    • General: Battery age will affect operating time. SpO2 and NBP monitoring, as well as battery age, reduce operating time.
    • Monochrome LCD display: Typical operation time while monitoring ECG is 3.5 hours from a new, fully-charged battery.
    • Color LCD display: Typical operation time while monitoring ECG is 3 hours from a new, fully-charged battery.

Operating Conditions

  • Ambient Temperature: 10 to 40 °C (50 to 104 °F)
  • Relative Humidty: 5 to 95% at 40 °C (104 °F)
  • Atmospheric Pressure: 700 to 1060 hPa

Storage and Transportation Conditions

  • Maximum: 50 °C (122 °F) at 50% relative humidity, or 70 °C (158 °F) at 15% relative humidity
  • Minimum: -25 °C (-13 °F)
  • Atmospheric Pressure: 500 to 1060 hPa
  • Duration: without battery recharge:
    • 2 months at 30 °C (86 °F)
    • 1 month at 40 °C (104 °F)
    • 2 weeks at 50 °C (122 °F)
    • 1 week at 60 °C (140 °F)
    • 4 days at 70 °C (158 °F)


  • Power Requirements: 90 to 264 VAC 50/60 Hz 500 mA.
  • Power consumption: 40 Watts (fully loaded).
  • Cooling: convection. Heat dissipation: 135Btu/br maximum


  • Leads: I, II, III, V, aVR, aVL, and a VF.
  • Lead fail: identifies failed lead.
  • Alarms: user-selectable upper and lower limits.
  • Heart Rate range: 30 to 300 bpm


  • Measurement Technique: Impedance variation detection.
  • Respiration Rate Range: 0 to 200 breaths per minute.
  • Alarms: user-selectable upper and lower respiration rate limits and apnea limit.


  • Number of channels: 1.
  • Transducer Sites: arterial, pulmonary arterial venous, left arterial, intracranial, and special.
  • Range: -25 mmHg to 300mmHg.
  • Alarms: user-selectable upper and lower limits for systolic, diastolic, and mean pressures


  • Number of channels: 1.
  • Range: 0°C to 45°C (32°F to 113°F).
  • Resolution: ±0.1°C (0.18°F).
  • Accuracy: ±0.1°C (0.18°F).
  • Alarms: user-selectable upper and lower limits


  • Measurement technique: oscillometric.
  • Displayed Parameters: systolic, diastolic, mean pressures, pulse rate, time of the last measurement.
  • Measurement Modes: manual, auto, and start in adult ICU and OR modes; a/manual and auto in neonatal mode.
  • Heart Rate Detection: 30 to 300 beats per minute.
  • Total Cycle Time: 20 to 40 seconds typical.
  • Automatic Cycle Times: 0 to 24 hours

Pulse Oximetry

  • Parameters Monitored: arterial oxygen saturation (SpO2) and peripheral pulse rate (PPR).
  • SpO2 Range: 50 to 100%.
  • PPR range: 30 to 300 beats per minute (±3 beats per minute).
  • SpO2 Accuracy: ±2% (70 to 100% SpO2),±3% (50 to 69% SpO2).
  • PPR Accuracy: ±3 beats per minute


  • Categories: patient status and system status.
  • Priority: 4 levels – crisis, warning, advisory, message.
  • Notification: audible and visual.
  • Setting: default and individual.
  • Silencing: 1 minute, current alarm only.
  • Pause: 5 minutes in adult ICU mode, 3 minutes in neonatal ICU mode, and 5, 15 minutes or permanent pause in OR mode.
  • Volume: default 70%, 70 dB measured at 1 meter.

Refurbished GE Dash 2000 Patient Monitor

Soma Tech Intl offers the GE Dash 2000 Patient Monitor up to 50% below OEM prices with the same service and warranty as new. This GE Dash monitor is not only technically refurbished but also cosmetically refurbished to make it work and look new. When the refurbishing process starts on the Dash 2000, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on GE patient monitors. If necessary, parts are replaced to make sure that all aspects of the Dash monitors are brought back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the multiparameter monitor is working like new it undergoes a special cosmetic restoration process. The ECG monitor is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the GE monitor is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished GE multiparameter monitors contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is actively looking to purchase a GE Dash 2000 If you or your facility is looking to sell your GE Dash 2000, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Dash 2000 takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain space for new equipment, or if you are looking to upgrade your current equipment, contact Soma Tech Intl’s purchasing department at [email protected] or send us a message on our Sell to Soma website.


Questions about our Patient Monitors?

Soma Tech Intl offers a wide range of patient monitors. If you have any questions about any of our patient monitors or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your patient monitors? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

Contact Us