GE Datex Ohmeda Cardiocap 5
24-Hour QuotesPricing up to 50% below the cost of new,
with service and warranty included. Download Specifications
Cardiocap 5 Features
The GE Datex Ohmeda Cardio Cap 5 is a compact patient monitor that can double as an anesthesia agent monitor. Offering parameter measurements such as; ECG, Spo2, CO2, NIBP, temperature, and heart rate. Additionally, the Cardiocap 5 can measure the dynamics of blood flow and airway gas detection. The CardioCap can work in an operation room, recovery, ambulatory surgery centers, or anywhere else patient monitors are required. The CardioCap 5 comes with a color LCD monitor that is easy to read from across the room. The Display can show up to 6 different waveforms at once. The System can hold up to 24 hours of trending data.
- Small Footprint and compact design
- 10.4 color LCD Display Screen
- 4 user-configurable modes
- built-in battery backup
- Compatible with the Datex-Ohmeda S/5 Network
- Convenient mounting system
Cardiocap 5 Specifications
Dimensions
- Height: 11.8” (30 cm)
- Width: 13” (33 cm)
- Depth: 8.7” (22 cm)
- Weight: <24.8 lb (<11.2 kg)
LCD Display
- Type: Active matrix color LCD
- Size (Diagonal): 10.4”
- Resolution: 640 x 480
Battery
- Type: 12V 2.6AH, lead acid
- Back-up battery time: at least 15 minutes when fully charged
- Charging time: 5 hours (typical)
- The green battery charge status LED is On when the battery is fully charged, on the holding voltage. The LED flashes when the battery is being charged.
NIBP
- Measurement range:
- Adult 25 to 260 mmHg (3.3 to 34.7 kPa)
- Child 25 to 195 mmHg (3.3 to 26.0 kPa)
- Infant 15 to 145 mmHg (2.0 to 19.3 kPa)
- Pulse Rate Range Accepted: 30 to 250 bpm
- Typical Measuring Time: Adults 23 seconds, infants 20 seconds
Temperature
- Measurement Range: 50 to 113°F (10 to 45°C)
- Measurement Accuracy: 77 to 113 °F ± 0.2 °F (25 to 45.0 °C ± 0.1 °C ); 50 to 76.8 °F ± 0.4 °F (10 to 24.9 °C ± 0.2 °C)
- Probe Type: Compatible with Datex-Ohmeda temperature probes only
ECG
- Waveform display (with 50 Hz power supply frequency):
- Monitoring filter: 0.5 to 30 Hz
- ST filter: 0.05 to 30Hz
- Diagnostic filter: 0.05 to 100 Hz
- Waveform display (with 60 Hz power supply frequency):
- Monitoring filter: 0.5 to 40 H
- ST filter: 0.05 to 40 Hz
- Diagnostic filter: 0.05 to 100 Hz
- Heart rate
- Measurement range: 30 to 250 bpm
- Measurement accuracy: ± 5% or ± 5
- Pacemaker pulse detection level: 2 to 500 mV
- Pacemaker pulse duration: 0.5 to 2 ms
Impedance Respiration
- Respiration Range: 4 to 120 respirations/minute
- Accuracy: ± 5% or ± 5 bpm
Pulse Oximetry (Standard)
- Display Update Time: 5 seconds
- Averaging Time: Adjustable
- Plethysmographic Waveform Scaling: Adjustable
- SpO2
- Calibration range: 50 to 100%
- Calibrated against functional saturation
- Measurement range: 40 to 100%
- Measurement accuracy (% SpO2 ±1 SD):
- 80 to 100% ± 2 digits;
- 50 to 80% ± 3 digits;
- Below 50% unspecified
- NOTE: SpO2 measurement accuracy is based on deep hypoxia studies using Datex-Ohmeda FingerSat sensors on volunteered subjects. Arterial blood samples were analyzed by a Radiometer OSM CO-oximeter. Refer to the sensor instructions for specific SpO2 accuracy data.
- Pulse rate
- Measurement range: 30 to 250 bpm
- Measurement accuracy: ± 5% or ± 5 bpm
- Default alarm limits
- SpO2: high Off, low 90%
- Pulse rate: high 160, low 40
- NOTE: Limits are adjustable.
- Sensor emitter wavelength ranges
- Red LED: 660 nm
- Infrared LED: 900 nm
Options
- Pulse Oximetry, Datex-Ohmeda Enhanced (N-XOSAT)
- Pulse Oximetry, Nellcor Compatible (N-XNSAT)
- Invasive Blood Pressure ( N-XP)
- Airway Gasses (N-XC, N-XCO, and N-XCAiO): CO2, O2, N2O, Halothane, Isoflurane, Enflurane, Sevoflurane, Desflurane
- Patient Spirometry (N-XV)
- NeuroMuscular Transmission (N-XNMT)
- Recorder (N-XREC)
Refurbished Ge Datex Ohmeda CardioCap 5 Monitor
Soma Tech Intl offers Refurbished Ge Datex CardioCap 5 Monitor up to 50% below OEM prices with the same service and warranty as new. The GE Datex Monitor is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the GE. The agent Monitor system is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on GE Datex CardioCap 5. If necessary, parts are replaced to make sure that all aspects of the pump are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the CardioCap 5 system is working like new it undergoes a special cosmetic restoration process. The patient monitor is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the infant warmer functions and looks like new. Soma Technology is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the monitor is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished Ge Datex CardioCap 5 Monitor contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase a GE CardioCap 5. If you or your facility is looking to sell your GE, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Ge Datex CardioCap 5 Monitor to Soma Technology takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Tech Intl is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Technology also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!