Mindray Datascope Gas Module SE Features
The Mindray Datascope Gas Module SE is a companion to several patient monitors. The Gas Module SE, commonly called the Datascope GM SE, is capable of automatically identifying and measuring five anesthetic agents (Desflurane, Enflurane, Sevoflurane, Halothane, and Isoflurane, as well as N20, CO2, and O2. This unit monitors all gases via sidestream sampling
- 200 mL/min sample flow rate.
- Uses a non-dispersive infrared analyzer to measure the absorption of the gas sample at seven infrared wavelengths.
- 2.5-second sampling delay
- Water trap that removes water and impurities from the patient sample.
- Analyzes patient samples at a fixed rate.
Mindray Datascope Gas Module SE Specifications
Dimensions
- Height: 4.2” (10.6 cm)
- Width: 11.85” (30.1 cm)
- Depth: 10” (25.4 cm)
- Weight: 9.6 lb (4.35 kg)
Performance
- Sampling Rate: 200 ± 20 ml/min (with sampling line = 6 meters, under normal conditions)
- Sampling Delay: 2.5 seconds (with a 3-meter sampling line)
- Total System Response Time: 2.9 seconds (with a 3-meter sampling line, including sampling delay and rise time)
- Display Update Rate: Breath-by-Breath
- Compensation: Automatic for pressure, CO2-N2O and CO2-O2 collision broadening the effect
- Warm-up Time: Maximum 2 minutes to operation with CO2, O2, and N2O; 5 minutes to the operation of anesthetic agents; 30 minutes for full accuracy specifications
- Autozeroing Interval: At startup and at 2, 4, 10, 15, 30, 45, and 60 minutes of operation. Every 60 minutes thereafter
Pneumatic
- Technology: Side-stream gas sampling
- Pneumatic Modes: Room air reference measurement: Automatic; Sampling system purge: Automatic
- Pump: Flow-controlled dual membrane
- Gas sampling rate: with DRYLINE™ Water Trap, Adult/Ped: 200 ml/min; with DRYLINE™ Water Trap, Neonate: 120 ml/min
- Occlusion Alarm: Actual flow < 40 ml/min
- Room Air Reference Measurement: Automatic when gas measurement bench temperature change is > 1°C or time since the last ref. measurement is > 4 h
- Reference Measurement Interval: ISO Accuracy Mode > 30 s Full Accuracy Mode > 4h
- Reference Measurement Duration: Typical 5 s, Max 9 s
- Purge Cycle: Automatic when occlusion detected
Refurbished Mindray Datascope Gas Module SE Agent Gas Monitor
Soma Tech Intl offers the Mindray Datascope Gas Module SE agent gas monitors up to 50% below OEM prices with the same service and warranty as new. Soma technically and cosmetically refurbishes these gas monitors back to the original engineering manufacturer’s specifications. Using highly skilled, trained, and certified in-house biomedical engineers these units are fully tested, disassembled, and if necessary, parts are replaced. Once all the parts of the Mindray Datascope Gas Module SE gas monitor are in working order, the gas monitor is calibrated back to OEM specifications, to make sure it works exactly the way it did when it originally left the manufacturer. Soma Tech Intl not only refurbished the product, but each unit also goes through a Special cosmetic restoration process. The Mindray Datascope Gas Module SE is cleaned and minor scratches and dentures are repaired, and decals are replaced if necessary.
Soma Tech Intl also purchases used and pre-owned gas monitors. If you or your facility wants to sell your Mindray Datascope Gas Module SE, Soma Tech Intl has an experienced purchasing department that makes the process headache and hassle-free. When selling your gas monitor to Soma, there is no need for a middle man, it is a direct transaction to Soma which ensures that you get top dollar for your medical equipment. Soma Tech Intl not only buys gas monitors but a wide variety of different medical equipment as well if your medical facility is looking to free up space. If you have medical equipment you would like to sell to Soma, send us a message here!
