Steris Reliance Synergy Features
The Steris Reliance Synergy Washer/Disinfector is a mechanical washer equipped with an Eagle 3000 Stage 3 control system. The Reliance washer/disinfector is designed with nine adjustable cycles. One additional cycle is available for customized programming to meet specific operating requirements. Three injection pumps are provided with a standard washer/disinfector. One enzyme pump, one detergent pump, and one lubricant pump (for the Thermal Rinse phase) increase the flexibility of the customized cycles. Up to five injection pumps can be installed. Each preprogrammed cycle is equipped with PreWash, Enzyme, Wash, Rinse, and Thermal Rinse phases.
- 10 DIN trays Single-Chamber Double-Door Washer/Disinfector compliant with EN / ISO 15883.
- Very good rack-to-chamber ratio of 96%(the closer to 100% the better the fit of the rack for the chamber).
- Steam or electric heating.
Steris Reliance Synergy Specifications
Dimensions
- Exterior dimensions: 42 x 80 x 36-1/2” (1067 x 2032 x 927 mm)
- Interior chamber dimensions: 26-1/2 x 26-1/4 x 26” (673 x 667 x 660 mm)
- Load Height: 31” (787 mm) above finished floor
- Weight, kg (lb): 544.3 kg (1,200.2 lb)
General
- Dw Rinse (Cycle Duration, Min): 0-10
- Rinse (Fluid Reservoir): 0-15
- Rinse / Lubricate (Cycle Duration, Min): 0-10
- Detergent Wash (Cycle Duration, Min): 0-15
- Cold Prewash (Cycle Duration, Min): 0-15
- Dry (Cycle Duration, Min): 0-30
- Pump Intensity, HP (Signals): Dual-speed 7.5, 2
- Max Flow, gal/min (Signals): 340.7 (90); 916 (242)
- Controller (Power Needed): Microprocessor
- Heat Source (Control Console): Steam or electric
Refurbished Steris Reliance Synergy Sterilizer
Soma Tech Intl offers Steris Reliance Synergy Sterilizers up to 50% below OEM prices with the same service and warranty as new. The Steris Reliance Synergy is not only technically refurbished but also cosmetically refurbished to make it work and look new. When the refurbishing process starts on the Steris Reliance Synergy, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on sterilizers. If necessary, parts are replaced to make sure that all aspects of the Steris Reliance Synergy are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Steris Reliance Synergy is working like new it undergoes a special cosmetic restoration process. The Steris Reliance Synergy is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Steris Reliance Synergy is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Steris Reliance Synergy sterilizers contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase a Steris Reliance Synergy If you or your facility is looking to sell your Steris Reliance Synergy, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Steris Reliance Synergy to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!
