Zoll E Series Defibrillator

The Zoll E Series defibrillator / monitor combines defibrillation, ECG display, advanced monitoring capabilities, and noninvasive transcutaneous pacing (NTP) with communication, data printing, and recording capabilities in a single lightweight portable device. The Zoll E Series is ideal for accompanying patients during transport. The Zoll E Series defibrillator was designed for use in both the hospital and the rugged EMS environment. The Zoll E Series is a versatile automated external defibrillator with manual capabilities.

• Measures chest compressions and rate and depth in real time.
• Provides visual and optional audible CPR feedback using CPR-D padz.
• All CPR data can be recorded and reviewed using RescueNet Code Review software.
• EasyRead Tri-Mode display, screen for use in the dark or direct sunlight.

Defibrillator

• Height: 5.75” (14.6 cm)
• Width: 13.1” (33.3 cm)
• Depth: 10.5” (26.7 cm)
• Weight: 13.2 lbs (5.99 kg)

Pacemaker (Pacer version)

• Type: VVI demand; asynchronous (fixed rate) when used without ECG leads or in ASYNC pacing mode
• Pulse Type: Rectilinear, constant current
• Pulse Shape and Duration: Rectilinear, 40 milliseconds ±2 milliseconds
• Pulse Amplitude: Variable 0 mA to 140 mA ±5% or 5 mA, whichever is greater Digitally displayed on the monitor (increments or decrements by a value of 2 mA)
• Pacing Rate: Variable from 30 ppm to 180 ppm ±1.5% (increments or decrements by a value of 2 ppm)

Defibrillator

• Waveform: Rectilinear Biphasic
• Energy Selection: Adult Mode: Selectable at 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 30, 50, 70, 85, 100, 120, 150, 200 J (Delivered into 50 Ω load). Selected using controls on sternum paddles or unit front panel.
• Charge Time: 6-40 seconds depending on battery life and amount of joules selected.
• Patient Impedance: Min: 15 oms; Max: 250 ohms
• Energy Display: Monitor display indicates both selected and delivered energy

ECG Monitoring

• Patient Connection: 3-lead ECG cable, 5-lead wire ECG cable, paddles or MFE Pads. Selectable by front panel switch.
• Input Protection: Fully defibrillator-protected. Special circuit prevents distortion of ECG by pacer pulse. (Pacer version only).
• Bandwidth: 0.67 Hz - 21 Hz (-3 dB) standard/0.05 Hz - 150 Hz Diagnostic 0.67 Hz - 27 Hz and 1 Hz - 21 Hz user-configurable
• Lead Selection: Displayed on monitor
• ECG Size: 0.5, 1, 1.5, 2, 3 cm/mV (Centimeter per millivolt) display on monitor
• Heart Rate: Digital display; Range: 0 bpm - 300 bpm; Accuracy: ±5%

CPR Monitoring

• Compression Depth: 0.75 to 3 inches ±0.25 inches 1.9 to 7.6 cm ±0.6 cm
• Compression Rate: 50 to 150 compressions per minute

Display

• Screen Type: High resolution, color liquid crystal display (LCD)
• Screen Size: 5.63 inches (14.3 cm) diagonally
• Sweep Speed: 25 mm/s
• Viewing Time: 4 seconds

Recorder

• Paper: 80 mm thermal (grid width); 90 mm (paper width)
• Speed: 25 mm/s or 50 mm/s (apparent), configurable for 12 lead output
• Delay: 6 seconds
• Annotations: Time, date, defib energy, heat rate, pacer output (Pacer version only), QRS sync marker, ECG SIZE, lead, alarm, DEFIB TEST OK/FAIL, ANALYZE ECG, PADS OFF, ANALYSIS HALTED, NOISY ECG, SHOCK ADVISED, NO SHOCK ADVISED, ECG TOO LARGE, and diagnostic bandwidth.
• Printing Method: High resolution, thermal array print head
• Print out Modes: Manual or automatic; user-configurable
• On/Off Control: Front panel and paddle

PCMCIA Card

• Capacity: Standard Series II Flash card - 2, 4, 16, or 32 Mb
• Audio Recording: Digital compressed audio data

Battery Packs

• Lithium Ion
• Weight: 1.5 lbs (0.68 kg)
• Voltage: 4.2 Volts per cell; 3 cells wired in series
• Recharge Time: 7 hours or less with integral charger
• Rechargeable, Sealed Lead Acid
• Weight: 2.2 lbs (1 kg)
• Voltage: 2 volts per cell; 5 cells wired in series
• Charge Time: 4 hours or less witn integral charger