Baxter InfusOR Infusion Pump

General Information About IV Therapy

IV Therapy

• IV therapy is used to deliver by infusion, fluids, medication, or nutrients to patients.
• There are two main types of administration of infusion, volumetric and syringe/PCA.

IV Therapy-Volumetric

• These pumps are used when the accuracy of fluid volume to be infused is critical such as in the case of medications used for infusion of drugs for circulatory support.
• Volumetric pumps deliver a given volume of fluid per unit time measured in mL/hour.
• Volumetric pumps can be single or multi-channel. Both types allow for the administration of more than one fluid at a time. Single-channel employs a piggyback method while multi-channel uses separate tubing set up for the administration of multiple medications or fluids.

IV Therapy-Syringe

• Syringe pumps are used to administer small volumes of fluids or medications. (1 mL to 60 mL syringe)
• Syringe pumps are an effective way to deliver medication with precision while reducing the chance of human error if the medication were to be administered by a member of the medical staff.* (of course, human error can occur when inputting data or choosing dose rate over time.)
• Like volumetric pumps, syringe pumps can be programmed to deliver the medication over a predetermined time.

Baxter InfusOR Smart Labels

The Smart Label is designed exclusively for use with the Baxter InfusO.R. Pump. When attached to this Syringe Pump, the microprocessor will decode the magnetic sensor in the Smart Label to determine delivery rates. The InfusOR Pump will then deliver the drug in the syringe at the indicated infusion rates. Each label has a label number, for identification purposes, which is located on the upper right section of the Smart Label.

The Infus OR Pump and the Smart Labels are intended for controlled rate delivery of small-volume parenteral fluids. Each Smart Label is intended for use with the drug indicated on the label at the specified concentration for delivery. The dug is delivered from either a 20 cc or 60 cc syringe which is also indicated on the Smart label. Pump delivery rates are shown on each Smart label. For labels that provide bolus delivery, have bodyweight settings between 30 and 100 kg. The Bolus delivery is determined by multiplying the drug concentration which is listed on the label.

When the InfusOR pumps are first turned on with the smart label in place, the pumps liquid crystal display (LCD) will show the label number.

Baxter Infus OR Parts

Soma Technology offers parts for the Baxter Infus OR. Are you looking for a locking pole clamp, syringe loading label, front case assembly, push block assembly, plunger screw, or more? Head on over to SomaMedicalParts.com to find more Baxter Infus OR Parts. Soma Medical Parts not only carries infusion/syringe pump parts, but also carries parts for all the medical equipment we sell. Contact Soma Tech Intl if you need help identifying, purchasing, or recommendations for your medical equipment.

Refurbished Baxter InfusOR Infusion Pump

Soma Tech Intl offers the Baxter InfusOR infusion pump up to 50% below OEM prices with the same service and warranty as new. Baxter InfusOR is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the infusion pump is carefully inspected and tested by our own in-house biomedical engineers that are highly skilled and certified to work on infusion pumps. If necessary, parts are replaced to make sure that all aspects of the Baxter Infusion pump are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the InfusOR Pump is working like new it undergoes a special cosmetic restoration process. The Baxter InfusOR is cleaned, minor scratches and dents are repaired, it's painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the Unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Baxter infusion pump is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbishedBaxter InfusOR infusion pump contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is also actively looking to purchase a Baxter InfusOR Infusion Pump If you or your facility is looking to sell your Baxter InfusOR infusion pump , be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned InfusOR to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain space for new equipment, or if you are looking to upgrade your current equipment, contact Soma Techn Intl's purchasing department at [email protected] or send us a message on our Sell to Soma website.