Hospira Plum XL3 Infusion Pump

24-Hour Quotes

Pricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications

Hospira Plum XL3 Features

The Plum® XL3 Micro/Macro is a multi-line volumetric infusion system designed to meet the growing demand for hospital-wide standardization. The Plum XL3 houses three independent pumping units, each having a primary line, secondary line, and piggyback fluid delivery capability. The Plum XL3 is suited for a wide range of medical/surgical and critical care applications. Full compatibility with LifeCare® PlumSets® administration sets and accessories and the LifeShield® needleless protection systems make the Plum XL3 a convenient and cost-effective infusion system.

  • Three independently programmable pumps
  • For primary fluid delivery
  • Functional will all types of containers
  • Automatically traps and eliminates air

Hospira Plum XL3 Specifications


  • Height: 13.75 in
  • Width: 12.2 in
  • Depth: 7.5 in (excluding pole clamp)
  • Weight: 20 lbs. (with batteries)


  • Power Requirements: 100-130 VAC, 47 /63 Hz. less than 60W
  • Power Cord: Hospital-grade AC cord, 10 ft long
  • Fuses: 1.0 A, 250 V, Slow Blowing
  • Batteries: Rechargeable and sealed, lead-acid 8 V batteries that are internal to the device. Accessible for ease of field replacement with leads and polarized connectors.
  • Battery Life: The Plum XL3 is battery-powered for emergency backup and temporary portable operation. It should be operated on battery power until full discharge at least once every six months for optimum battery performance and life. A fully charged battery set will provide an operating time of approximately four hours when all pumping units operate simultaneously at a rate of 125 mL/hr or a cumulative delivery of 1,000 mL at any combination of rates and pumping units.
  • Recharge: The batteries charge whenever the PlumXL3 Micro/Macro is connected to AC power. If the device pumping units are turned to OFF CHARGE. a recharge takes approximately six hours. A recharge takes longer if the pumping units are turned on.


  • Operating Temperature:10° to 40° C, 10% to 90% relative humidity

Transportation and Storage Environment

  • Temperature: -20° to 60° C
  • Relative humidity: 10% to 90%
  • Atmospheric Pressure: 0-10,000 feet (0-3,000m) or
    equivalent pressure

Delivery Rate Range

  • Primary Mode: 0.1 to 99.9 mL/hr (in 0.1-mL
  • Secodary Mode: 100 to 999 mL/hr (in 1 mL
  • KVO: The lower of 1.0 mL/hr or the
    primary delivery rate

Dose Limit Range

  • Primary Mode: 0.1 to 99.9 mL (in 0.1-mL increments)
  • Secodray Mode: 100 to 9999 mL (in 1-mL

Occlusion Range

  • Distal: 10 psig (+5, -2 psig)

Refurbished Hospira Plum XL3 Infusion Pump

Soma Tech Intl offers Hospira Plum XL3 Infusion Pump up to 50% below OEM prices with the same service and warranty as new. Hospira Plum XL3 is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the infusion pump, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on surgical tables. If necessary, parts are replaced to make sure that all aspects of the Hospira Plum XL3 are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Hospira Plum XL3 infusion pump is working like new it undergoes a special cosmetic restoration process. The Hospira Plum XL3 is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the Unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Hospira Plum XL3 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished Hospira Plum XL3 infusion pump contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is also actively looking to purchase a Hospira Plum XL3. If you or your facility is looking to sell your Hospira Plum XL3 Infusion pump be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Hospira Plum XL3 to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!


Questions about our Infusion Pumps?

Soma Tech Intl offers a wide range of infusion pumps. If you have any questions about any of our infusion pumps or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your infusion pumps? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

Contact Us