1.800.GET.SOMA (1.800.438.7662)

Axia V1500A Touchscreen

click on thumbnail to zoom

Other products by Axia
Other products in Patient Monitors

Specifications

Axia V1500A Patient Monitor Features

The Axia V1500A is a patient Monitor design for a Fast Pace environment like an Emergency Room and ICU. The Axia V1500A comes with a high resolution 15 inch touch screen making it easy to adapt for every situation. With quick adjustments, the default settings, alarm limits, and the ability to hold up to 72 hours of trending data. The Axia V1500A offers standard measurements including; non-invasive blood pressure, ECG with arrhythmia detection, SpO2, temperature, and respiration rate. Additional measurements can be monitored by adding a plug-in module for End-tidal CO2, anesthesia Agent Measurements, and invasive blood pressure. The Axia Monitor offers a variety of ways to connect the monitor to the facilities' networking system. Making it easy to Save, store and transfer the patient's data when needed.

15-Inch touchscreen display.
Manage up to 72 hours of detailed patient data.
Easily upgradable from a basic vital signs monitor to a continuous bedside monitor, to an operating room monitor while keeping the patient on a single monitor at all times.
Offers Ethernet and RS-232 connections with open source communication protocol.
HL7 compliant.

Axia V1500A Patient Monitor Specifications

Applications

Neonatal
Pediatric
Adult patients
Anesthetic measurement

General

Display: 15-inch color touchscreen
Trace: 8 waveforms
Indicator: Alarm indicator, Power indicator, QRS beep and alarm sound
Trend time: 1 - 72 hour

Recorder

Type: Built-in, thermal array, 3 channels
Record width: 48mm
Recorder paper: 50mm
Record speed: 25mm/s, 50mm/s

Networking

Industry standard 802.11b/g wireless network

Power

Source: External AC power or internal battery
AC Power: 100 ~ 240VAC, 50/60Hz, 150VA
Battery: Built-in & rechargeable lithium ion
Operating Time: 3+ hours

Environmental

Operating Temperature: 5 ~ 40 °C
Storage Temperature: -20 ~ 65 °C
Operating Humidity: ≤80%
Storage Humidity: ≤80%

ECG

Input: 5-lead ECG cable and standard AAMI line for connection
Lead Choice: I, II, III, aVR, aVF, aVL, V, V1-V6, TEST
Gain Choice : x0.5, x1, x2, x4
Frequency Characteristic: 0.05 ~ 35 HZ (+3dB)
ECG Waveforms: 7 channels
Penetration Voltage: 4000VAC 50/60Hz
Sweep Speed: 12.5, 25, 50 and 100 mm/sec (left to right or right to left)
HR Display Range: 30 ~ 300bpm
Accuracy: ±1bpm or ±1%, whichever is greater
Alarm Limit Range Setting: Upper limit 10

RESP

Measure Method: RA-LL impedance
Range: 0 ~ 120 rpm
Accuracy: ±3 rpm
Alarm Limit Setting: Upper limit 6 ~ 120 rpm,; lower limit 3 ~ 120 rpm
Sweep Speed:12.5, 25, 50 and 100 mm/sec (left to right or right to left)

SpO2

ASpO2: Anti-motion SpO2
SpO2% Range: 0-100%
SpO2 Accuracy: ±2% (70 ~ 100%, non-motion); ±3% (70 ~ 100%, motion)
Pulse Rate Range: 30-250 bpm
Pulse Rate Accuracy: ±2 bpm (non-motion; ±3 bpm (motion)
Alarm Limit Setting: Upper limit 70 ~ 100%,; lower limit 70 ~ 100%
SpO2 Probe: Red light LED wavelength 660nm±5nm; Infrared light LED wavelength 940nm±10nm

NIBP

Measuring Technology: Automatic oscillating measurement
Cuff Inflating: <30s (0 ~ 300 mmHg, standard adult cuff)
Measuring Period: AVE<40s
Mode: Manual, Auto
Measuring Interval in AUTO Mode: 2 min ~ 4 hrs
Pulse Rate Range: 30 ~ 250 (bpm)
Adult/Pediatric Mode: SYS: 40 ~ 250 (mmHg); DIA: 15 ~ 200 (mmHg)
Neonatal Mode: SYS: 40 ~ 135 (mmHg); DIA: 15 ~ 100 (mmHg)
Maximum Mean error: ±5mmHg
Maximum Standard deviation: 8mmHg
Resolution: 1mmHg
Overpressure Protection: Adult Mode: 300 (mmHg); Neonatal Mode: 160 (mmHg)
Alarm Limit Setting: SYS: 50 ~ 240 mmHg
DIA: 15 ~ 180 mmHg

TEMP

Range: 25 ~ 50 (°C)
Accuracy: ± 0.2°C (25.0 ~ 34.9°C); ± 0.1°C (35.0 ~ 39.9°C); ± 0.2°C (40.0 ~ 44.9°C); ± 0.3°C (45.0 ~ 50.0°C)
Display Resolution: 0.1°C
Alarm Limit Setting: Upper limit 0 ~ 50°C, lower limit 0 ~ 50°C
Channel: 2 channels

IBP

Measurement Range: -50 ~ 300mmHg
Channel: 2 channels
Pressure Transducer: Sensitivity, 5μV/V/mmHg
Impedance Range: 300 ~ 3000Ω
Transducer Sites: ART, PA,CVP, RAP, LAP, ICP
Unit: mmHg/kPa selectable
Resolution: 1mmHg
Accurancy: ±1mmHg or ±2%, whichever is greater
AlarmRange: -10 ~ 300mmHg

EtCO2

CO2 Measurement Range: 0 ~ 99mmHg
Accuracy: ±2mmHg (0 ~ 38mmHg); 39-99mmHg ±5% of reading +0.08% for every 1mmHg (above 38mmHg)
Sampling Rate: 50 ml/min
Initialization Time: 30 seconds (typical), reaches ±5% steady-state accuracy within 3 minutes
Respiration Rate: 0 ~ 150 breaths
Mode: Adult, neonate

C.O. (Cardiac Output)

Measurement Method: Thermodilution Method
Measurement Range

C.O.: 0.1 to 20 L/min
TB: 23 to 43℃
TI: 0 to 27℃

Resolution

C.O.: 0.1 L/min
TB, TI 0.1℃

Accuracy

C.O. ±5% or ±0.1 L/min, whichever is greater, as measured using electronically generated flow curves.
TB, TI: ±0.1(without sensor)

Alarm Range: TB 23 to 43℃
Repeatability: C.O. ±2% or ±0.1 L/min, whichever is greater, as measured using electronically generated flow curves

Anesthetic Agents

Method:Infrared absorption
Gas Sorts: Halothane, Isoflurane, Enflurane, Sevoflurane, Desflurane, CO2, N2O, O2 (optional Automatic Agent ID)
Measurement Range

Halothane, Isoflurane: 0 ~ 8.5%
Enflurane, Sevoflurane: 0 ~ 10%
Desflurane: 0 ~ 20%
CO2: 0 ~ 10%
N2O: 0 ~ 100%
O2: 0 ~ 100%

Bias

Halothane, Isoflurane, Enflurane, Sevoflu rane, Desflurane: ±(0.15 Vol% + 15% rel.)
CO2: ±(0.5 Vol% + 12% rel.)
N2O: ± (2 Vol% + 8% rel.)
O2: ±3 Vol%

Other Standard Features

OxyCRG
Drug dose calculation
Cascading ECG
On screen NIPB trends (up to 250 readings)
User set defaults
Arrhythmia detection
ST segment

Refurbished Axia V1500A Touch Screen Monitor

Soma Tech Intl offers the Axia V1500A Touch Screen monitors up to 50% below OEM prices with the same service and warranty as new. Soma technically and cosmetically refurbishes these patient monitors back to the original engineering manufacturer specifications. Using highly skilled, trained, and certified in-house biomedical engineers these units are fully tested, disassembled, and if necessary, parts are replaced. Once all the parts of the Axia V1500A Touch Screen Monitor are in working order, the patient monitor is calibrated back to OEM specifications, to make sure it works exactly the way it did when it originally left the manufacturer. Soma Tech Intl not only refurbished the product, but each unit also goes through a Special cosmetic restoration process. The Axia V1500A Touch Screen is cleaned and minor scratches and dentures are repaired, and decals are replaced if necessary.

Soma Tech Intl also purchases used and pre-owned patient Monitor. If you or your facility wants to sell your Axia V1500A Touch Screen, Soma Tech Intl has an experienced purchasing department that makes the process headache and hassle-free. When selling your patient monitor to Soma, there is no need for a middle man, it is a direct transaction to Soma which ensures that you get top dollar for your medical equipment. Soma Tech Intl not only buys patient monitors but a wide variety of different medical equipment as well if your medical facility is looking to free up space. If you have medical equipment you would like to sell to soma, send us a message here!

Questions about our Patient Monitors?

Soma Tech Intl offers a wide range of patient monitors. If you have any questions about any of our monitors or need a quick quote, call 1-800-GET-SOMA and one of our knowledgeable sales representatives will help you.