Drager Apollo

Quotes in less than 24 hours Download Specifications

Drager Apollo Features

The Drager Apollo is an anesthesia machine that offers a high-speed piston ventilator built into the machine. The E-vent Plus Servo ventilator helps the anesthesia machine maximize the peak flow of ventilation and gases. At the same time, the Drager Apollo also offers an integrated boating system that reduces wires and tubes as well as reducing any accidental disconnection of the patient from the machine during critical times.

The Drager Apollo offers unique low-flow ventilation which can reduce the cost of inhalation anesthesia agents. Along with reducing the fresh gas flow from 3l a minute to 1l per minute. Unlike a bellowed ventilator the Apollo does not require drive gas.

  • User-friendly ergonomics. All functional elements are within easy reach of being seated or standing.
  • The unique breathing bag arm design provides the ultimate flexibility.
  • Simple straightforward startup makes it easier for the staff and provides complete information on device status. An integrated breathing system eliminates external hoses and clutter, reducing the risk of misconnection and disconnection.
  • A fully automatic self-test lasts approximately three minutes, reflects the results to the user, and makes results available at any time.
  • Advanced ventilation.
  • E-Vent plus servo-controlled high-speed piston ventilator works with great precision to supply a maximum peak flow far in excess of any bellows ventilator, resulting in the kind of performance previously only seen in the ICU.
  • The consistent use of low-flow anesthesia techniques can significantly reduce the cost of inhalational anesthetic agents. Reducing the fresh gas flow from 3L/min to 1L/min can result in anesthetic agent savings of up to 50%.
  • Integrated Auxiliary O2 and pressure gauge where you need them.


Drager Apollo Specifications


  • Height: 59 in (150 cm)
  • Width: 33.5 in (85 cm)
  • Depth: 31.5 in (80 cm)
  • Weight: 365 lb (165 kg) (Without vaporizer and gas cylinders)


  • Power: 200 W
  • Operating Voltage: 100 to 127 VAC (- 15 % + 10 %) 45 – 65 Hz
  • Integrated Power Backup: At least 30 minutes, typically 90 minutes; Depending on ventilation parameters

Anesthesia Gas Supply Module

  • Fresh Gas Flow, Delivery: 0 to min. 12 L/min per gas (O2, N2O, Air)
  • O2 Flush: > 35 L/min
  • External Fresh Gas Outlet: Optional
  • Vaporizer: Drager AutoExclusion, 2 vap., Drager AutoExclusion, 3 vap., Dräger Interlock, 2 vap., Selectatec, 2 vap

Ventilator Operating Specifications

  • Ventilator E-Vent plus: Electrically operated and electronically controlled
  • Operating modes:
    • Manual, spontaneous,
    • Volume mode (IPPV),
    • Pressure mode (PCV),
    • Optional: pressure support (PS)
    • Optional: Volume Auto Flow
    • Synchronized volume-controlled ventilation (SIMV), optionally with PS
    • Synchronized pressure-controlled ventilation (SIMV), optionally with PS
    • Synchronized volume-guaranteed ventilation volume AF, optionally with PS

Control Input Changes

  • Pressure Limitation PMAX (in volume mode): (PEEP+10) up to 70 cmH2O
  • Pressure Limitation PINSP (in pressure mode): (PEEP+5) up to 70 cmH2O
  • PEEP in Volume Mode: 0 – 20 cmH2O (max. PMAX-10 cmH2O)
  • PEEP in Pressure Mode: 0 – 20 cmH2O (max. PINSP-5 cmH2O)
  • Tidal Volume (in volume mode): 20 – 1400 mL 5 – 1400 mL (with advanced ventilation option)
  • Tidal Volume (in pressure mode): 5 – 1400 mL (deliverable with advanced ventilation option)
  • Trigger: Off, 0.3 – 15 L/min
  • Breathing Frequency: 3 – 100 per minute
  • Minimum Frequency: for apnea ventilation in PS mode Off, 3 – 20 per minute (with advanced ventilation option)
  • Breathing Time Ratio (I: E): max. 5:1
  • Inspiratory Time (TINSP): 0.2 – 6.7 s
  • Inspiratory Pause (TIP: TINSP): 0 – 60 %
  • Inspiratory Flow: max. 150 L/min
  • Inspiratory Ramp TSLOPE: 0.0 – 2 s (in pressure mode, pressure support, and volume AF mode)
  • System Leak Tightness: < 150 ml/min at 30 cmH2O (automatic leakage test)
  • Integrated Safety Functions: Sensitive ORC function: minimum oxygen supply of 21 vol.% O2 or 200 ml/min in mixtures with nitrous oxide (N2O)

Ventilator Monitoring

  • Monitoring: Minute volume (MV) and tidal volume (VT); breathing frequency, peak pressure, plateau pressure, mean airway pressure, PEEP; patient compliance CPAT; the following measurement variables/parameters can be displayed as a graph: airway pressure, inspiratory and expiratory flow; bar graph for expiratory minute volume and tidal volume; display of graphic trends; numerical list of measurement values; auto-set for alarm limits.

Gas Monitoring

  • Monitoring: Inspiratory and expiratory concentration of O2, N2O, CO2, and volatile anesthetics (Halothane, Enflurane, Isoflurane, Sevoflurane, Desflurane); the following measurement variables/parameters can be displayed as a graph: concentration of CO2, O2, and volatile anesthetic agents, virtual flow tubes for fresh gas flow.
  • Control Screen: 12.1 in. full-color TFT display

Breathing System

  • Heated breathing system Yes
  • Filling Volume Absorber 1.5 L with reusable absorber canister; 1.3 L with CLIC Absorber 800+; 1.2 L CLIC Absorber Drägersorb Free

Gas Supply Connection

  • Gas Supply: O2, N2O, Air
  • Cylinder Supply O2, N2O, Air


  • Communication Interface: 2 x RS 232
  • Protocol: Medibus, Medibus X
  • Data Available for Export: All alarms, pressures, O2, CO2, volume and fresh gas flow data, ventilation settings, flow, and pressure curve, anesthesia gases
  • Writing Surfaces: Writing plate
  • Additional Optional Accessories Anesthetic gas scavenging system (AGSS), endotracheal suction unit

Refurbished Drager Apollo Anesthesia Machine

Soma Tech Intl offers the Drager Apollo Anesthesia Machines up to 50% below OEM prices with the same service and warranty as new. Soma Technology technically and cosmetically refurbishes these anesthesia machines back to the original engineering manufacturer’s specifications. Using highly skilled, trained, and certified in-house biomedical engineers these units are fully tested, disassembled, and if necessary, parts are replaced. Once all the parts of the Drager Apollo Anesthesia Machines are in working order, the monitors are calibrated back to OEM specifications, to make sure it works exactly the way it did when it originally left the manufacturer. Soma Technology not only refurbishes the product, but each unit also goes through a Special cosmetic restoration process. The Drager Apollo is cleaned and minor scratches and dents are repaired, and decals are replaced if necessary. After this strenuous refurbishing process, the anesthesia machine functions and looks new. Soma Technology is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the anesthesia machine is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Drager Apollo anesthesia machine contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl. also, purchases used and pre-owned Drager Apollo Anesthesia Machines. If you or your facility wants to sell your surgical tables, Soma Tech has an experienced purchasing department that makes the process headache and hassle-free. When selling your Apollo Anesthesia Machines to Soma, there is no need for a middle man, it is a direct transaction to Soma which ensures that you get top dollar for your medical equipment. Soma Tech not only buys anesthesia machines but also buys a wide variety of different medical equipment if your medical facility is looking to free up space. If you have medical equipment you would like to sell to Soma, send us a message here!



Questions about our Anesthesia Machines?

Soma Tech Intl offers a wide range of anesthesia machines. If you have any questions about any of our anesthesia equipment or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your anesthesia machines? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

Contact Us