Drager Fabius Tiro M

24-Hour Quotes

Pricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications

Drager Fabius Tiro M Features

The Fabius Tiro M is a compact anesthesia system that offers the full spectrum of anesthesia ventilation to military anesthesiologists and CRNAs in the field of operations. The Tiro M can be used in a variety of mobile and stationary military applications where general anesthesia is required. The modular design allows all standard system components to be stored in a single container so that assembly and disassembly of the unit are easily accomplished.

  • Compact anesthesia system that offers the full spectrum of anesthesia ventilation to military anesthesiologists.
  • The unit can be used in a variety of mobile and stationary military applications where general anesthesia is required.
  • Modular design allows all standard system components to be stored in a single container so that assembly and disassembly of the unit are easily accomplished.
  • The entire system packs and ships in one container, ensuring delivery of a complete anesthesia machine to the field.
  • Simple, modular design allows for full set-up within 15 minutes, without the use of tools.
  • Electronically controlled, piston-driven ventilator uses no drive gas, decreasing fresh gas usage overall.
  • Easy-to-use interface reduces the time required for clinicians to become familiar with the system.

  • Drager Fabius Tiro M Specifications

    Weight

    • Container basic empty: 75.4 lb (34.2 kg)
    • Container loaded or set: 198 lb (91 kg)

    Dimensions W x H x D

    • Container: (W) 30.11 in. x (H) 30.16 in. x (D) 30.11 in
    • Fabius Tiro M setup on Container: (W) 49.8 in. x (H) 47.2 in. x (D) 31.9 in.

    Ambient Conditions

    • Operation temperature: 50 to 95 °F (10 to 35 °C)
    • Storage temperature: 14 to 140 °F (-10 to 60 °C)
    • Power supply (rating non-configurable): 100 to 240 VAC, 50/60 Hz, 70 VA
    • Battery (supports ventilator and integrated monitor): > 45 min
    • Operating modes: Standard: Manual / Spontaneous; Volume Control (VC); Pressure Control (PC); Pressure; Support (PS); Synchronized Volume Controlled; Ventilation w/PS (SIMV/PS)
    • Breathing frequency: 4 to 60 bpm
    • Positive end-expiratory pressure (PEEP): 0 – 20 cmH2O
    • Inspiration/expiration ratio (Ti: Te): 4: 1 to 1: 4
    • Pressure limiting (Pmax): 15 to 70 cmH2O
    • Tidal Volume (VT): 20 to 1400 mL in Volume Control; 20 to 1100 mL in SIMV/PS
    • Inspiratory pause (Tip: Ti): 0 to 50 %
    • SIMV inspiratory time (Tinsp): 0.3 to 4.0 sec
    • Inspiratory pressure (Pinsp): (PEEP + 5) to 65 cmH2O
    • Inspiratory flow (InspFlow): 10 to 75 L/min in Volume; and Pressure Control; 10 to 85 L/min in Pressure Support
    • Pressure Support Level (?PPS): PEEP +3 to 20 cmH2O
    • Min. frequency for apnea-ventilation (Freq. Min.): 3 to 20 bpm and “OFF”
    • Trigger: 2 to 15 L/min
    • Integrated safety functions: Sensitive Oxygen Ratio Controller (S-ORC) guarantees a minimum O2 concentration of 23% in an O2 /N2O mixture. N2O cut-off if the O2 fresh gas valve is closed or if O2 flow is less than 0.2 L/min. Audible and visual (flashing red LED) indication in case O2 pressure drops below 20 psi (1.38 bar) ± 4 psi (0.27 bar). In case of electricity and battery failure, manual ventilation, gas delivery, and agent delivery are possible. The positive pressure relief valve opens at 75 ± 5 cmH2O. The negative pressure relief valve opens at -7.5 to -9 cmH2O.
    • Range of fresh gas flow indicators: 0.00 to 12.0 L/min
    • Total fresh gas flow meter: 0 to 10 L/min, calibrated with a mixture of 50% O2 and 50% N2O mixture
    • O2 flush (bypass): at 55 psi (3.8 kPa x 100): max. 50 L/min; at 50 psi (3.4 kPa x 100): max. 35 L/min
    • Vaporizer Mount: 1 position Dräger mount
    • Monitoring: Continuous monitoring of inspiratory O2 concentration, breathing frequency, tidal volume, minute volume, mean or plateau pressure, peak airway pressure as well as PEEP. In addition, all fresh gas flow information is displayed as virtual flow tubes.
    • Serial interface: 1 x RS 232 (standard)
    • Protocols: Vitalink and Medibus
    • Data available for export: All fresh gas flow, ventilation and O2 data, flow curves, and pressure curves
    • The volume of the CO2 absorber: 1.5 Liter, Option: Dräger Medical’s prefilled CLIC absorber
    • Volume of entire compact breathing system: 2.8 Liter + bag

     

 

Refurbished Drager Fabius Tiro M Anesthesia Machine

Soma Tech Intl offers Drager Fabius Tiro M anesthesia machines up to 50% below OEM prices with the same service and warranty as new. The Drager Fabius is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the anesthesia machine, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on anesthesia machines. If necessary, parts are replaced to make sure that all aspects of the anesthesia machine are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the anesthesia machine is working like new it undergoes a special cosmetic restoration process. The Drager Fabius Trio M is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Drager Fabius Trio M is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Drager Fabius Tiro anesthesia machines contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is also actively looking to purchase a Drager Fabius Tiro M If you or your facility is looking to sell your Anesthesia Machine, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Drager Fabius Tiro M to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!

Banner

Questions about our Anesthesia Machines?

Soma Tech Intl offers a wide range of anesthesia machines. If you have any questions about any of our anesthesia equipment or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your anesthesia machines? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

1-800-GET-SOMA
Contact Us