Penlon Prima SP2

24-Hour Quotes

Pricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications

Penlon Prima SP2 Anesthesia System Features

The Penlon Prima SP2 is an anesthesia workstation that provides controlled concentrations and flows of anesthesia gases into the patient’s breathing system. The SP2 comes with an open architecture that can fit any monitor or accessory. It offers ultra-low anesthesia flow, up to six different ventilation modes, and up to four gases. The Penlon anesthesia machine comes with a touchscreen AV-S ventilator and A200SP Absorber, providing medical professionals with an easy-to-use, advanced anesthesia system.

  • Advanced, easy-to-use features for maximum patient safety
  • Large color touchscreen
  • Integrated design and superior build quality
  • GCX mounting rails for superior mounting solutions
  • Dual oxygen, nitrous oxide,  and air flowmeters
  • Two oxygen, one nitrous oxide, and one air yoke
  • Two-station Selectatec back bar
  • Flowmeter and work surface lighting
  • Four electrical outlets
  • Oxygen auxiliary flowmeter
  • Six Ventilation Modes:
    • Spontaneous
    • Volume
    • Pressure
    • Pressure Support
    • SIMV
    • SMMV

Prima SP2 Specifications


  • Height: 54 in (1365 mm)
  • Width: 28.5 in (720 mm)
  • Depth: 32.5 in (800 mm)
  • Weight: 165.35 lbs ( 75kg)

Gas Supplies

  • Cylinders: A maximum of four cylinder fittings can be specified All cylinder yokes are pin-indexed
  • Fourth Gas Options: Carbon dioxide, Helium, Xenon
  • Pipeline: Maximum of three (oxygen, nitrous oxide, air). All specifications to relevant national standards.

Flowmeters Flow Rage

  • Single flow Tubes:
    • Oxygen: 0 – 10 L/min
    • Nitrous Oxide: 0 – 10 L/min
    • Air 0 – 10 L/min
    • Helium 0 – 10 L/min
  • Cascade Flow Tubes:
    • Oxygen / Air / Nitrous Oxide 0 – 1000 ml/min
    • 0 – 10 L/min (graduated 1 – 10 L/min)
  • Accuracy: ± 2.5% of full scale reading

Gas Pressure

  • Pipeline supplies: 340 kPA (50 pig)
  • Cylinder supplies:
    • Reduced pressure from regulator (at 5 L/min flow) 310kPa + 15kPA / -35 kPa (45 pig +2psig / -5 pig)
    • Regulator diaphragm bursting pressure 2800kPa (406 psig)
    • Reduced pressure system safety valve: 600 kPa (87 psig)
    • Safety valve (protects flowmeter, vaporizer etc.) 41kPa ±10% (6 psi ±10%)

Operating Conditions

  • Temperature +10 to 38oC (50 to 100oF)
  • Atmospheric Pressure range 70 kPa to 106 kPa
  • Altitude 2438 m (8000 ft) maximum
  • Humidity 10 – 95% R.H. non-condensing

Transport and Storage Temperatures

  • Basic machine -5 to 40oC (23 to 112oF)
  • Oxygen monitor option -5 to 50oC (23 to 122oF )

Electrical Supply

  • Internal Power / Auxiliary power sockets
    • US/CSA specification machines: 110 – 120 VAC, 60 Hz, 1350 VA maximum
    • Non-US/CSA specification machines: 100 – 240 VAC, 50 – 60 Hz, 1100 – 2500 VA maximum
  • Auxiliary power outlets / No internal power
    • US/CSA specification machines: 110 -120 VAC, 60 Hz, 1200 VA maximum
    • Non-US/CSA specification machines: 100 – 240 VAC, 50 – 60 Hz, 1000 – 2400 VA maximum
  • Internal power / No power outlets
    • Non-US/CSA specification machines only: 100 – 240 VAC, 50 – 60 Hz, 100 VA maximum
  • Fuse: T2AH ceramic (¼ x 1¼ inch) high breaking capacity fuses

Refurbished Penlon Prima PS2 Anesthesia Machine

Soma Tech Intl offers Prima PS2 anesthesia machines up to 50% below OEM prices with the same service and warranty as new. The Prima PS2 anesthesia machine is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Penlon Prima PS2, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on anesthesia machines. If necessary, parts are replaced to make sure that all aspects of the Anesthesia Machine are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Prima PS2 is working like new it undergoes a special cosmetic restoration process. The Prima PS2 anesthesia machine is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Prima PS2 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Prima PS2 anesthesia machines contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is also actively looking to purchase a Prima PS2. If you or your facility is looking to sell your Penlon Prima PS2, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Prima PS2 to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!


Questions about our Anesthesia Machines?

Soma Tech Intl offers a wide range of anesthesia machines. If you have any questions about any of our anesthesia equipment or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your anesthesia machines? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

Contact Us