Carefusion Alaris BD 8300 EtCO2 Pump Module

Quotes in less than 24 hours Download Specifications

Alaris Carefusion 8300 Features

The Alaris CareFusion 8300 EtCo2 Module provides continuous respiratory monitoring. The Infusion Pump monitors CO2, EtCO2 (exhalation) FiCO2 (inhalation), and respiratory rate. The Carefusion EtCO2 Module is a side-stream capnography. The Disposables deliver a sample of the inhaled and exhaled gasses from the ventilator disposable or directly from the patient into the monitor for CO2 measurement moisture and patient secretions are extracted from the sample by the microstream inline filter while maintaining the shape of the CO2 waveform. The Alaris CareFusion 8300 EtCO2 Module releases a gas sample through a micro-sample cell (15 Microliters).

  • Reduce risks of opioid infusions.
  • Customizable profiles add flexibility across all patient care areas.
  • Utilizes sampling lines that cut the need for moving parts, external sensors, or routine calibration.
  • Provides patient EtCO2 sampling products to meet a broad spectrum of sampling needs available with or without oxygen delivery.

Alaris Carefusion 8300 Specifications

Dimensions

  • Height: 8.8 in
  • Width: 6.9 in
  • Depth: 9 in
  • Weight: 7.2 lbs

Environmental Operating Conditions

  • Atmospheric Pressure: 525 – 4560 mmHg (700 – 6080hPa)
  • Relative Humidity: 20 – 90 % Noncondensing
  • Temperature Range: 41 – 104°F (5 – 40 °C)

Environmental Storage / Transportation Conditions

  • Atmospheric Pressure: 375 – 760 mmHg (500- 1013 hPa)
  • Relative Humidity: 5 – 85% Noncondensing
  • Temperature Range: -4 – 140°F (-20 – 160°C)

Flow Rate

  • Nominally 50 mL/min -7.5 +15 mL/min

Warm Up Time

  • 30 seconds

Power Requirements

  • 100 – 240V ~, 50/60 Hz, 150 VA MAX

Internal Power Source

  • Operating time: 5.5 hours

Measurement Range

  • EtCO2: 0-99 mmHg FiCO2: 0-99 mmHg Respiratory Rate: 0-150 bp

Refurbished The Alaris CareFusion 8300 EtCo2 Pump Module

Soma Tech Intl offers the Alaris CareFusion 8300 EtCo2 Pump Module up to 50% below OEM prices with the same service and warranty as new. The Alaris CareFusion 8300 is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Alaris CareFusion 8300, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on Infusion pump systems. If necessary, parts are replaced to make sure that all aspects of the Alaris CareFusion 8300 are to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Alaris CareFusion 8300 is working like new it undergoes a special cosmetic restoration process. The Alaris CareFusion 8300 is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Alaris CareFusion 8300 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Alaris Carefusion 8300 pump modules contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is actively looking to purchase an Alaris Carefusion 8300 If you or your facility are looking to sell your Alaris Carefusion 8300, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Alaris CareFusion 8300 takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!

Banner

Questions about our Infusion Pumps?

Soma Tech Intl offers a wide range of infusion pumps. If you have any questions about any of our infusion pumps or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your infusion pumps? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

1-800-GET-SOMA
Contact Us