ENGLISH 
Español
HAMILTON-MR1
24-Hour QuotesPricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications
HAMILTON-MR1 Features
The HAMILTON-MR1 MRI ventilator provides positive pressure support for adult and pediatric patients. This Ventilator from Hamilton Medical can be used in an MRI department and is a good fit for patient transport within a medical facility. This is a fully functional electronically controlled ICU ventilator. The MR1 ventilator can be used in a magnetic field strength of 50 mT.
- Adult, pediatric, and optional neonatal ventilation compatibility.
- High-performance turbine allows this ventilator to run independently from compressed air.
- Leak compensation for NIV and invasive ventilation.
- Up to 9 hours runtime on battery power.
HAMILTON-MR1 Specifications
Dimensions
- Height: 10.43” (26.5 cm)
- Width: 11.1” (30 cm)
- Length: 8.3” (21 cm)
- Weight: 15 lb (6.8 kg)
Pneumatics
- High-pressure Oxygen Inlet
- Pressure: 2.8 to 6 bar / 280 to 600 kPa / 41 to 87 psi
- Flow: Maximum of 200 l/min
- Connector: DISS (CGA 1240) or NIST
- Air Supply: Integrated blower
- Delivered flow
- 260 l/min ±10% against ambient pressure (at sea level); 120 l/min at 30 cmH20; 0 to 200 l/min with 100% O2; Flow limitation in neonatal modes: 40 l/min
- Flow accuracy (for calibrated flow sensor)
- Adult/Ped: ±10% or ±300 ml/min (whichever is greater)
- Neonatal: ±2 ml/s or ±10% (whichever is greater)
- Delivered pressure
- Adult: 0 to 60 cmH2O
- Neonatal: 0 to 45 cmH20
- Inspiratory outlet (To patient port) Connector: ISO 15 mm female/22 mm male conical
- Expiratory outlet (From patient port) Connector (on the expiratory valve): ISO 15 mm female/22 mm male conical
Battery
- Electrical: 10.8 V DC, 6.7 Ah, 72 Wh, 50 W typical, 150 W maximum
- Type: Lithium-ion
- Operating time: Operating times are measured with two fully charged batteries. Maximum run time: 9 hours.
- Recharge time: While the ventilator is connected to primary power, approximately 3.25 h to fully recharge one battery, approximately
6.25 h to fully recharge two batteries.
Magnetic Field
- Static magnetic field
- = 50 mT
- Corresponds to approximately 1 m distance from the front of a 3.0 T MRI scanner.
Electrical
- Input Power: 100 to 240 VAC -15% /+10%, 50/60 Hz
- Power Consumption: 50 W typical, 120 W maximum
Ventilation Modes
- Intelligent ventilation modes with Adaptive Support Ventilation (ASV)
- Pressure-controlled modes (including biphasic modes)
- Volume-controlled modes (adaptive)
- Pressure support modes
- Modes for noninvasive ventilation
Refurbishment Process (English)
Soma Tech Intl offers the Hamilton Medical MR1 ventilator at up to 50% below OEM pricing, while providing the same service and warranty as a new unit. Each MR1 ventilator is fully refurbished, both technically and cosmetically, to ensure safe and precise ventilation performance in critical care and MRI environments. During the refurbishment process, the Hamilton MR1 ventilator is carefully inspected and tested by our certified in-house biomedical engineers who specialize in advanced respiratory and MRI compatible equipment. Any components that do not meet the original manufacturer specifications, including pneumatic systems, internal electronics, sensors, valves, control interfaces, alarms, or power systems, are repaired or replaced using OEM-quality parts.
After the technical refurbishment is complete, the MR1 ventilator undergoes a detailed cosmetic restoration. The unit is thoroughly cleaned, cosmetic wear is corrected, housings are refinished as needed, and new labels or decals are applied when required. Once refurbishment is complete, the Hamilton Medical MR1 functions and appears like new. Soma Tech Intl is ISO 13485 certified, ensuring that every refurbished medical device meets strict international quality and safety standards. Before shipment, each unit passes a final quality control inspection and is labeled patient-ready. If you are interested in purchasing a refurbished Hamilton Medical MR1 ventilator, contact Soma at soma@somatechnology.com or call 1-800-438-7662.
Soma Tech Intl is also actively seeking to purchase Hamilton Medical MR1 ventilators. If your facility is upgrading respiratory or MRI compatible equipment or has units available for sale, our experienced purchasing department will assist you throughout the entire process. Selling directly to Soma eliminates middleman costs and helps ensure your facility receives top market value. Soma is fully HIPAA compliant and guarantees secure handling and transportation of all equipment. Trade in credit options are also available. To sell your equipment, send us a message here.
