GE OEC 9900 Elite C-Arm

Quotes in less than 24 hours Download Specifications

GE OEC 9900 Elite Features

The GE OEC 9900 Elite C-arm offers improved image quality and monitoring. The 9900 Elite can perform DSA (Digital Subtraction Angiography) while either moving the c-arm or the patient. The c-arm has an easy-to-use interface and a deeper arch to allow for better access to the patient for specific procedures like cardiovascular and pain management. The GE system applies algorithms and a variety of different bandwidths that are preprogrammed – this can provide improved accuracy and definition to the images. The GE 9900 Elite comes with a dual flat panel and touchscreen monitor. This makes it easier to maneuver the monitor to comfortably view the c-arm images from any angle. Another C-arm by GE is the GE OEC 9800 Plus C-Arm.

  • 1k2 High-Resolution Imaging Chain
  • Dynamic Range Management (DRM)
  • Tri-Mode 9 or 12-inch Image Intensifier
  • Digital Imaging Rotation
  • 1k x 1k CCD Camera
  • Full Frame Capture AutoTrak
  • Automatic Brightness Stabilization
  • Bolus Chase Preset – 30 Pulse/second
  • Recording Playback up to 30 FPS
  • Dual 18-inch Anti-Glare Touch Flat Panel Displays on an Articulating Arm
  • 15kW power generator – 60kHz high frequency- Up to 120Vp
  • Rotating anode X-ray tube
  • Digital Image Rotation
  • Fluoro Mode
  • Pulsed Fluoro Mode
  • High-Level Pulsed Fluoro
  • Digital Spot Mode
  • Radiographic Mode
  • Easy archiving and documentation
  • Physician-controlled x-ray footswitch and hand switch
  • High-Power pulse anode
  • Dynamic studies at up to 30 pps without motion artifact
  • Dicom 3.0 – Print

GE OEC 9900 Elite C-Arm Specifications

X-ray System

Generator

  • 60kHz high frequency
  • 15kW power
  • Up to 120kVp
  • Up to 75mA for radiographic film exposure
  • Continuous high-level fluoro (HLF) up to 20mA
  • Digital spot up to 75mA
  • Digital cine pulse
    • 15 or 30 pulses per second, 60 Hz
    • 12 or 25 pulses per second, 50 Hz
    • Up to 150mA
    • 10ms pulse width
  • Full power from the standard wall outlet
  • Patented battery-buffered design

X-ray Tube

  • Rotating anode X-ray tube
  • 0.3 and 0.6 nominal focal spots
  • Anode heat capacity: 300,000 HU
  • Anode cooling rate: 85,000 HU/min.
  • Housing heat capacity: 1,600,000 HU
  • Housing cooling rate:
    • 9” I.I. Super C- 22,500 HU/min
    • 12” I.I. – 22,500 HU/min

Digital Image Rotation

  • Digitally adjusts image display
  • Automatic image update
    • Image rotation
    • Image reversal (side-to-side)
    • Image invert (top-to-bottom)
  • Image positioning without additional exposure

Preview Collimator

  • On-screen collimator position indication
  • PreView iris collimator
  • PreView Tungsten rotatable double leaf collimator
  • Adjusts collimators without X-ray exposure

Fluoro Mode

  • kVp range: 40 -120
  • mA range:
    • 0.2 – 10 normal mode
    • 1.0 – 20 HLF (high level fluoro)
  • Auto and manual fluoro modes
  • AutoTrak ABS varies mA, kVp, camera gain

Pulsed Fluoro Mode

  • kVp range: 40 – 120
  • mA range: 0.2 – 10
  • Pulse rate: 1, 2, 4, 8
  • Pulse width: 25 or 50ms
  • AutoTrak ABS, mA, kVp, camera gain
  • Reduces X-ray dose to patient and operator

High Level Pulsed Fluoro

  • kVp range: 40 – 120
  • mA range: 1 – 40
  • Pulse rate: 1, 2, 4, 8
  • Pulse width: 25 or 50ms
  • AutoTrak ABS, mA, kVp, and camera gain

Digital Spot Mode

  • kVp range: 40 – 120
  • mA range: Up to 75
  • Automatic exposure termination and automatic image save

Radiographic Mode

  • mA range: up to 75
  • mAs range: up to 300
  • Computer controlled exposure time
  • Optional film cassette holder
    • 10” x 12” (24cm x 30cm) for 9” I.I.
    • 14” x 14” (35cm x 35cm) for 12” I.I.

Video Imaging System

9″ Image Intensifier

  • Tri-mode 9”/6”/4.5” (23cm/15cm/11cm) image intensifier
  • Minimum central resolution (at monitor):
    • 9” (23cm): 2.2 lp/mm
    • 6” (15cm): 3.0 lp/mm
    • 4.5” (11cm): 3.5 lp/mm
  • DQE: 65% (typical)

12″ Image Intensifier

  • Tri-mode 12”/9”/6” (31cm/23cm/15cm) image intensifier
  • Minimum central resolution (at monitor):
    • 12” (23cm): 1.6 lp/mm
    • 9” (15cm): 2.2 lp/mm
    • 6” (11cm): 2.6 lp/mm
  • DQE: 65% (typical)
Precision Imaging with Dynamic Range Management (DRM)
  • Preset Imaging Profile: Orthopedic
  • Enhances features of interest while attenuating background noise

AutoTrak Automatic Brightness Stabilization (ABS)

  • Automatically seeks the subject anatomy anywhere within the imaging field and selects the optimum imaging technique
  • Automatically adjusts to anatomical size and location
  • Provides uniform image quality throughout the entire image
  • Simplifies operation

Image Quality Features

  • Smart Window
    • Dynamically senses the collimator position and automatically adjusts brightness and contrast to produce high image quality
  • Smart Metal
    • Allows the user to adjust automatic brightness and contrast sensitivity levels to metal
    • Provides optimum image quality even when metal is introduced to the field
  • Tungsten Collimator
    • A dense collimator limits the X-ray exposure area
    • Reduces scatter radiation
    • Improves image detail

Video Camera

  • High-resolution 1k x 1k CCD camera
  • Full frame capture
  • Motorized rotation
  • On-screen orientation indicator (real-time feedback without fluoro)
  • Left-right image reversal
  • Top-bottom image invert

Video Display

  • Dual 19” (48cm) display anti-glare, LCD flat panel monitors mounted on an articulating arm
    • 22” horizontal travel
    • 7° up/10° down
    • Monitors viewable from all four sides of the workstation
    • Horizontal and vertical viewing angle 170°
  • 1200 CD/M2 maximum brightness
  • Touch screen system control
  • 1280 x 1024 high-resolution monitors
  • Integrated color monitor for display of VGA, DVI, DVI-D, S-VHS, and SDISD formats

Refurbished GE 9900 Elite C-Arm

Soma Tech Intl offers Refurbished 9900 C-arm up to 50% below OEM prices with the same service and warranty as new. The OEC 9900 Elite C-Arm is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts the Sonosite Titan system is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on Ge 9900 Elite. If necessary, parts are replaced to make sure that all aspects of the c-arm are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the 9900 Elite system is working like new it undergoes a special cosmetic restoration process. The C-Arm is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the infant warmer functions and looks like new. Soma Tech is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the C-Arm is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished OEC 9900 Elite C-arm contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is also actively looking to purchase a GE 9900 Elite. If you or your facility is looking to sell your GE, be sure to contact Soma Tech Intl Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned GE 9900 Elite C-Arm to Soma Tech takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Tech is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!

Banner

Questions about our C-arms?

Soma Tech Intl offers a wide range of C-Arms. If you have any questions about any of our C-arm machines or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your C-arms? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

1-800-GET-SOMA
Contact Us