GE OEC Elite – 9″ I.I.

24-Hour Quotes

Pricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications

GE OEC Elite – 9″ Image Intensifier Features

The GE OEC Elite with a 9” image intensifier was designed to enhance surgical efficiency while delivering superb image quality. The OEC Elite allows you to manage dosages with profiles and control features and operates with enhanced ease of use and efficiency. This system is ideally suited for a range of surgical needs including orthopedics, gastrointestinal, endoscopic, urologic, neurologic, critical care, and emergency procedures.

  • Clear 1k x1k x 16-bit image processing at 30 fps.
  • 9-Inch image intensifier detector.
  • Optional laser aimer to position the detector over the anatomy of interest.
  • Removable anti-scatter grid
  • 30% less force is needed to maneuver and position than in previous models.
  • Advanced cooling technology.
  • Low-profile X-ray tube.
  • Crisp high-bright anti-glare 27” touchscreen display.

GE OEC Elite – 9″ Image Intensifier Specifications

Physical Specifications


  • System Height: 69.7” (177 cm)
  • System Width: 33.5” (85.1 cm)
  • System Length: 77.8” (197.6 cm)
  • Weight: 610 lbs. (277 kg)


  • SID: 39.4” (100.1 cm)
  • Free space in an arc: 31” (78.7 cm)
  • Depth in arc: 26” (66 cm)
  • Orbital Rotation: 115 ° (90° Underscan / 25° Overscan)
  • Lateral Rotation: 360° (+180° / -180°)
  • Wig/wag: 20°
  • Horizontal travel: 8” (20.3 cm)
  • Vertical Travel: 18” (45.7 cm)


  • Height: 67.5” (171.5 cm)
  • Width: 34.1” (86.7 cm)
  • Depth: 25.8” (65.5 cm)
  • Weight: 428 lbs (194 kg)

Image Acquisition

9-Inch Image Intensifier

  • Tri-mode 9”/6”/4.5” image intensifier
  • Minimum central resolution (at monitor):
    • 9”: 2.2 lp/mm
    • 6”: 3.0 lp/mm
    • 4.5”: 3.5 lp/mm
  • DQE: 65% (typical)
  • Removable grid

Image Processing

  • 1 k x 1 k x 16 bit: image intensifier


  • 60 kHz high frequency
  • 15 kW power
  • Up to 120 kVp
  • Continuous high-level fluoroscopy (HLF) up to 20 mA
  • Pulsed HLF up to 40 mA
  • Digital spot up to 75 mA
  • Full power from a standard wall outlet
  • Patented battery-buffered design

X-ray Tube

  • Rotating anode X-ray tube
  • 0.3 mm and 0.6 mm nominal focal spots
  • Anode heat capacity: 300,000 HU
  • Anode cooling rate: 85,000 HU/min
  • Housing heat capacity: 1,600,000 HU/min
  • Housing cooling rate:
    • 21 cm CFD – 22,500 HU/min
    • 31 cm CFD – 31,000 HU/min
    • 9” I.I. – 22,500 HU/min
    • 12” I.I. – 22,500 HU/min

Digital Image Orientation

  • Digitally adjusts image display for live and last image hold
  • Automatic image update preserves image orientation settings applied during live and last image hold for subsequent images
    • Image rotation
    • Live and last image hold rotated in real-time
    • On-screen display of rotation degrees
    • Image reversal (left-to-right)
    • Image invert (top-to-bottom)
  • On-screen orientation indicator (real-time feedback without fluoroscopy)

Preview Collimator

  • On-screen collimator position indication
  • Preview iris collimator
  • Preview Tungsten rotatable double leaf collimator
  • Adjust collimators without X-ray exposure

Fluoroscopy Mode

  • kVp range: 40 – 120
  • mA range: 0.2 – 10 normal mode 0.2 – 20 HLF
  • Auto and manual fluoroscopy modes

Pulsed Fluoroscopy Mode

  • kVp range: 40 – 120
  • mA range: 0.2 – 10 normal mode 0.2 – 40 HLF
  • Pulse rate: 8 pps
  • Pulse width: 25 ms
  • Auto and manual pulsed fluoroscopy modes
  • Reduces X-ray dose to patient and operator

Digital Spot Mode

  • kVp range: 40 – 120
  • mA range: Up to 75
  • Automatic exposure termination and automatic image save

TechView Monitor

*Optional on image Intensifier modes
  • 10.4” (26.4cm) display, LCD flat panel monitor mounted on mainframe
    • 270° side/side rotation
    • 30° up/ 5° down tilt
    • Horizontal viewing angle 80°, Vertical viewing angle 70°
  • 800 x 600 resolution monitor

Image Processing


  • Automatically seeks the subject anatomy anywhere within the imaging field
  • Selects the optimum imaging technique by varying mA, kVp, and gain
  • Automatically adjusts to anatomical size and location
  • Provides uniform image quality throughout the entire image

Image I.Q.

  • Smart Window – Dynamically senses the collimator position and automatically adjusts image brightness and contrast
  • Smart Metal – Adjusts brightness and contrast automatically and allows the user to adjust sensitivity levels for optimum image quality even when metal is introduced into the field
  • Tungsten Collimator – Denser collimator limits X-ray exposure area, reduces scatter radiation, and improves image detail



  • Wired Ethernet
  • USB data transfer
  • DVI-I output
  • Integrated film/paper printer (optional)*
  • Thermal printers

Video Monitor

  • 27 in (69 cm) LCD TFT color display
  • Anti-glare
  • 450 cd/m2 maximum brightness
  • Touch screen system control
  • 2560 x 1440 high-resolution display
  • Integrated PIP window to display color
  • DVI-D input

User Interface

  • Touchscreen control simplifies the operation
  • Automated system operation requires minimum operator interface
  • Multi-functional controls with a footswitch or hand-held control
  • Physical keyboard with integrated touchpad with a sealed silicone design for dust-free, contaminant-free, and water-resistant use
  • Physical image control keypad
  • On-screen virtual keyboard and image control keypad
  • Multi-purpose image directory to retrieve and review images, copy the image(s), or manually delete the image(s)
  • Integrated DICOM interface
  • Radiation dose structured report (RDSR)
  • X-ray dose summary
  • Room-in-use indicator interface
  • SmartConnect allows the workstation to operate independently of the C-arm and connect/ disconnect the C-arm when needed

Refurbished GE OEC Elite – 9″ I.I. C-Arm

Soma Tech Intl offers GE OEC Elite – 9″ I.I. C-Arm up to 50% below OEM prices with the same service and warranty as new. The GE OECElite – 9″ I.I. is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the GE OEC Elite – 9″ I.I., it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on C-Arms. If necessary, parts are replaced to make sure that all aspects of the GE OEC Elite – 9″ I.I. is functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the GE OEC Elite – 12″ I.I. is working like new it undergoes a special cosmetic restoration process. The GE OEC Elite – 9″ I.I. is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the Unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the GE OEC Elite – 9″ I.I. is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished GE OEC Elite – 9″ I.I. contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is also actively looking to purchase a GE OEC Elite – 9″ I.I. If you or your facility is looking to sell your GE OEC Elite – 9″ I.I., be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned GE OEC Elite – 9″ I.I. to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!


Questions about our C-arms?

Soma Tech Intl offers a wide range of C-Arms. If you have any questions about any of our C-arm machines or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your C-arms? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

Contact Us