Zoll Propaq MD Defibrillator

The Propaq MD is an ultra-lightweight, airworthy monitor/defibrillator that provides advanced monitoring capabilities, including full Masimo® Rainbow SET technology.

Perfect for Tactical Evacuation Care

The Propaq MD offers multiple display modes to operate in bright sunlight or during night missions (NVG-friendly display). The battery system and AC power charger provide worldwide sea, land, and air operating capabilities for this rugged device. The Propaq MD can monitor all physiologic parameters and provide numerous shocks for over six hours on a single battery charge.

• The Propaq MD adds defibrillation and pacing to the Propaq monitor you know and trust—yet weighs less than the Propaq 206.
• Exceptionally rugged and reliable to withstand hostile environments, the Propaq MD is engineered to meet military and airworthiness standards.
• Designed with the user in mind, it’s intuitive and easy to use.
• At the push of a button, it transforms from a basic, user-friendly vital signs monitor to the most advanced and comprehensive monitoring device available.
• The Propaq MD can display up to four waveforms simultaneously as well as a full 12-lead ECG for on-screen review.
• Plug and Play technology maximizes clinical efficiency.
• The hot swappable 6-hour battery provides twice the operating time of your current Propaq.

Dimensions

• Weight: 10.6 lbs. without paper and battery 11.7 lbs. with paper and battery
• Dimensions: 8.9” x 10.4” x 7.9”
• With soft handle: 8.9” x 8.75” x 7.9”

Display

• Type: Bright, Color, LCD TFT
• Brightness: User adjustable
• Resolution: 640 x 480 pixels
• Waveform Traces: Up to 4 waveforms
• Display Modes: Standard, High Contrast, NVG (night vision goggle) Friendly
• Waveform Display Width: 11.5 cm

Power

• Rechargeable, user replaceable, lithium-ion battery
• Operating Time: 6 hours (display brightness at 30%, ECG, Sp02, EtCO2, IPx3, Temp x2 and NIBP every 15 min, and 10 200-joule shocks)
• Battery: Size: 182 mm x 95 mm x 31 mm
• Battery Weight: 1.36 lbs
• Battery Indicators: 5 battery capacity LED
• indicators, fault indicator, recalibration indicator
• Recharge Rate: 4 hours to 100%
• AC Power Adapter: 100-240 VAC 50, 60, 400 Hz(@110V)

Environment

• Operating Temperature: 0° – 50° C
• Operating Relative Humidity: 15% – 95%, NC
• Operating Altitude: Up to 15,000 ft
• Transport/Storage Temperature: -30° – 70° C
• Shock: IEC 60068-2-27, 100g, 6ms half sine

Temperature

• Two YSI 400/700 compatible channels
• Range: 0° – 50° C,
• Units: °C or °F
• Display: T1, T2, and Delta temp
• Accuracy: ± 0.1° C

Defibrillator

• Wavform: Rectilinear BiphasicT
• Energy Selections: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 30, 50, 70, 85, 100, 120, 150, 200 joules
• Energy Display: Monitor display indicates both selected and delivered energy.
• Charge Time: < 7 seconds to 200 J, typical
• Charge Controls: Control on apex paddle and on device front panel.
• Paddles: External anterior/anterior adult and pediatric. Adult paddles slide off to expose pediatric paddles.
• Synchronized Mode: Synchronizes defibrillator pulse to patient’s R-wave. “SYNC” message displayed on monitor. Marker on display and on recorder paper identifies R-wave discharge point.
• Built-In Defibrillator Tester: Tests defibrillator energy output and continuity of universal cable and paddles.
• Modes: AED function with manual override, manual defibrillation.

External Pacer

• Type: External transcutaneous pacing
• Pulse Types: Rectilinear, constant current
• Pulse Width: 40 ms ± 2 ms
• Pacer Rate: 30 – 180 BPM ± 1.5%
• Output Current: 0 – 140 mA ± 5% or 5 mA
• Modes: Demand and Fixed

Invasive Pressure

• Three channels
• Pressure Range: -30 – 300 mmHg
• Pulse Rate Measurement Range: 25 – 250 BPM Formats: S/D, S/D (M), (M) user selectable
• User-Selectable Labels: P1, P2, P3, ABP, AO, ART, CVP, BAP, FAP, LAP, PAP, RAP, UAP, UVP, ICP
• Transducer Requirements: 5 μV/V/mmHg
• Zero Adjustment: ± 200 mmHg
• Numeric Pressure Accuracy: ± 2 mmHg or 2% of reading, plus transducer error
• Transducer Connector: Standard 6 pin AAMI

ECG

• Cable Detection: Automatic 3-, 5-, 12-lead
• Input: 3-lead cable, 5-lead cable, 12-lead cable, paddles, therapy cable
• Cable Compatibility: Propaq Encore, Propaq CS Leads: I, II, III, AVR, AVL, AVF, V1 – V6
• Bandwidth: (User Selectable)
• 0.67 – 20 Hz Limited mode
• <0.67 – 40 Hz Monitor mode
• 0.25 – 40 Hz Filtered Diagnostic mode
• Heart Rate Range: 30 – 300 BPM
• Heart Rate Accuracy: ± 3 BPM or 3%
• Pacer detection and display
• Electrosurgery interference suppression
• ESU and defibrillation protected
• ECG Sizes: 0.125, 0.25, 0.5, 1, 2, 4 cm/mv, and auto-ranging
• Sweep Speed: 25 mm/sec, 50 mm/sec Common Mode Rejection: Complies with AAMI

Patient Mode

• User Selectable: Adult, Pediatric, Neonate. Sets defaults for alarms, defibrillation energy, and NIBP settings.

Trends (on Screen)

• Tabular numeric format
• All parameters trended/viewable
• Trend Intervals: 1, 5, 10, 15, 30, 60 minutes Duration: 24 hours at 1-minute intervals
• Snapshots: Minimum of 32 display data captures (12 seconds of pre- and post-button press)
• Quick Access Trend Display via Display Button

Printer

• Waveforms Printed: 1, 2, or 3
• Print Speeds: 25 mm/sec or 50 mm/sec
• Print Modes: Manual or automatic (user configurable)
• On/Off Control: Front panel or paddle
• Paper Delay: 6 seconds
• Frequency Response: Same as the monitor’s settings
• Paper Width: 80 mm