Terumo Sarns TCM II Features
The Sarns TCM II is a computer-controlled heating and cooling system for use during cardiopulmonary bypass. Compared to devices using refrigerated cold water, the TCM II achieves faster, more reliable cooling through the use of melting ice, which maintains a stable, cold temperature as it conducts heat away. TCM II’s heating system reflects the current standard of technology. Its powerful heaters and high-efficiency mixing manifold allow you to bring up temperatures quickly. Control is at your fingertips, using either the main display or the optional remote module. A simplified display panel gives you accurate digital temperature data to protect your patients. On either panel, you can select temperatures ranging from 0 – 42°C to bring your patients rapidly and precisely to the temperature needed. For the protection of pediatric patients, a maximum water-to-venous blood temperature gradient can be set to operate during rewarming.
- Digital Heater/Cooler
- Maintains exact temperatures with sensitive, microprocessor-driven controls
- Minimizes patient rewarming time with powerful heaters and high-efficiency mixing manifold
- Reduces patient cooling time by melting ice
- Sarns optional remote control and display module for temperature management at your
fingertips while the main unit is situated in a convenient, remote location - Temperature displays in digital readouts for up to nine temperature probes; readouts for
up to 9 temperature probes by using 3 temperature modules; an alarm can be set for
3 probes (one probe per module) located at crucial temperature sites - Precise temperature controls maintained by a microprocessor which allows oxygenator
water temperature selection from 0 – 42°C in one-degree increments - Independent cardioplegia control offers three pump speeds for variable cooling rates
and a separate reservoir accommodates drop-in heat exchangers - Pressure-regulated blanket ports with water supply maintain the same temperature as
water going to the oxygenator heat exchanger
Terumo Sarns TCM II Specifications
Dimensions
Main Unit
- Height: 34.4″ (87,4cm)
- Width: 20.0″ (50,8cm)
- Depth: 31.5″ (80,0cm)
- Weight: 282 lbs (127,9 kg) with the tanks empty; 356 lbs (161,5 kg) with the tanks full
Large Tank
- Length: 18.5’’ (47,0 cm)
- Width: 8.7’’ (22,1 cm)
- Depth: 21.5’’ (54,6 cm)
- Water Capacity: 9 gal (34 L)
- Crushed Ice Capacity: 40 lbs (18,1 kg)
Small Tank
- Length: 9.5’’ (24,1 cm)
- Width: 5.5’’ (14,0 cm)
- Depth: 9.3’’ (23,6 cm)
- Water Capacity: 1.2 gal (4,5 L)
- Crushed Ice Capacity: 7.5 lbs (3.4 kg)
Temperature Display Unit
- Length: 8.75’’ (22,2 cm)
- Width: 5.5’’ (14,0 cm)
- Depth: 2.5’’ (6,4 cm)
Temperature Probe Modules
- Length: 9.0’’ (22,9 cm)
- Width: 5.75’’ (14,6 cm)
- Depth: 2.5’’ (6,4 cm)
Water Outlet Temperature
- Oxygenator heat exchanger and blanket: 0 – 42°C
- Cardioplegia: Ice water only
- Heaters: 2 each – 1000 watt, 220V units
Electrical
- Voltage: 210/250VAC (220/240V nominal)
- Frequency: 50 Hz
- Amperage: 12 A
- Current Leakage: 500 A maximum
- Ground Resistance: 0.1 Ohm maximum
Refurbished Terumo Sarns TCM II Heater/Cooler Systems
Soma Technology, Inc. offers Refurbished Terumo Sarns TCM II Heater/Cooler Systems up to 50% below OEM prices with the same service and warranty as new. The Terumo Sarns TCM II Heater/Cooler System is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Heater/Cooler System it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on Heater/Cooler Systems. If necessary, parts are replaced to make sure that all aspects of the heater/cooler are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Terumo Sarns TCM II Heater/Cooler System is working like new it undergoes a special cosmetic restoration process. The Terumo Sarns TCM II is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the Unit functions and looks like new. Soma Technology is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Terumo Sarns TCM II Heater/Cooler System is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished Terumo Sarns TCM II Heater/Cooler System contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase Terumo Sarns TCM II Heater/Cooler Systems. If you or your facility is looking to sell your Terumo Sarns TCM II Heater/Cooler System, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Terumo Sarns TCM II Heater/Cooler System to Soma Tech takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Tech Intl is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!
