1.800.GET.SOMA (1.800.438.7662)

Carefusion Alaris BD 8120 PCA Pump Module

click on thumbnail to zoom

Other products by Carefusion
Other products in Infusion Pumps

Specifications

24 Hour Turn Around Time - The Fastest Turnaround for Medical Equipment

Carefusion Alaris BD 8120 PCA Pump Module Features

The CareFusion Alaris 8120 PCA Module works with the Alaris 8015 PC unit. The Alaris 8120 Module is used for delivery of pain management medications via patient-controlled dosing in a locked clear case.

The Alaris Medley 8120 PCA Syringe module is part of a comprehensive IV medication safety system with a common user interface shared across multiple infusion modalities. The 8120 is designed to work with the Alaris PC Unit as well as with other Alaris System modules.

The Alaris® PCA module is a syringe-based PCA infusion device that provides quick access to total dose history and monitors trending data giving you additional tools to analyze and address a patient’s response to pain therapy

Use this module to customize the Alaris 8000 or 8015 PC Unit Infusion Pumps

Reduced respiratory failure
Decreased adverse drug events
Monitoring for all at-risk patients

Carefusion Alaris BD 8120 PCA Pump Module Specifications

Dimensions

Height: 15 in
Width: 4.5 in
Depth: 7.5 in
Weight: 5.5lbs

Bolus Volume After Occlusion, Maximum

High: .997mL
Low: .396 mL

Bolus Delivery Rate

150 mL/hr
75-500 mL/hr ( limited by syringe size

Lockout Interval

1 - 180 muntes in 1 minute increments
Min/max 1 - 180 minutes

Max. Accumulated Dose Range

1 hour limit
Disabled/1, 2 or 4 hour limit

Max Rate

999 mL/hr
0.1 - 99.9 mL/h in 0.1 mL/h increments; 100 - 999 mL/h in 1 mL/h increments

Occlusion Pressure Set Point

High: 800 mmHg
Low: 200 mmHg
Medium: 500 mmhm

Reduced respiratory failure

The PCA infusion pauses if the patient's respiratory parameter falls below hospital-defined EtCO2 or SpO2 limits.

Decreased adverse drug events

Guardrails™ MX drugs error reduction software helps reduce adverse drug events.

Monitoring for all at-risk patients

The module follows industry best practice recommendations for continuous EtCO2 and SpO2 monitoring.

Untitled Document

General Information About IV Therapy

IV Therapy

IV therapy is used to deliver by infusion, fluids, medication, or nutrients to patients.
There are two main types of administration of infusion, volumetric and syringe/PCA.

IV Therapy-Volumetric

These pumps are used when the accuracy of fluid volume to be infused is critical such as in the case of medications used for infusion of drugs for circulatory support.

Volumetric pumps deliver a given volume of fluid per unit time measured in mL/hour.

Volumetric pumps can be single or multi channel. Both types allow for the administration of more than one fluid at a time. Single channel employs a piggyback method while multi-channel uses separate tubing set up for the administration of multiple medications or fluids

IV Therapy-Syringe

Syringe pumps are used to administer small volumes of fluids or medications. (1 mL to 60 mL syringe)

Syringe pumps are an effective way to deliver medication with precision while reducing the chance of human error if the medication were to be administered by a member of the medical staff* (of course human error can occur when inputting data or choosing dose rate over time)

Like volumetric pumps, syringe pumps can be programmed to deliver the medication over a predetermined time

Questions about our Infusion Pumps?

Soma Technology, Inc offers a wide range of infusion pumps. If you have any questions about any of our infusion pumps or need a quick quote, call 1-800-GET-SOMA and one of our knowledgeable sales representatives will help you.