BD Alaris Syringe Module 8110

24-Hour Quotes

Pricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications

BD Alaris Syringe Module 8110 Features

The BD Alaris Syringe Module 8110 is intended for fluid delivery to a patient. The 8110 pump was designed to work with the Alaris PC unit and the Guardrails drug library system. The Alaris 8110 is a fluid delivery system, that provides fluids, medications, blood, and blood products internally to a patient. The Syringe system uses a pressure-sensing dispenser to reduce the infusion time and allow for precise infusions. Using the drug library system software accurate delivery of dosages can be delivered to the patient. The Alaris 8110 can be used for all patients including adults, pediatrics, and neonates.

  • Intended for the infusion delivery of fluids, medications, blood and blood products
  • Intravenous, intr-arterial and enteral used for delivering of fluids
  • uses a pressure disc in the syringe system to accurately monitor the line pressure and delivery
  • Part of the Alaris Medley Point of Care System
  • Guardrails drug library compatible
  • lightweight – only 4.5 pounds
  • Common User interface- same front panel keys as other modules
  • Front loading of the Syringe
  • Durable Design and can handle up to four additional modules attached to it
  • Plunger driveled protected – extended handle to protect plunger

Carefusion Alaris BD 8110 Specifications

Bolus Volume, Maximum after Occlusion

Without Pressure Sensing Disc

  • Pressure Setting Low: 0.512 Bolus Volume (mL)
  • Pressure Setting Medium: 0.776 Bolus Volume (mL)
  • Pressure Setting High: 1.103 Bolus Volume (mL)

With Pressure Sensing Disc

  • Pressure Setting 300 mmHg: Back Off Disabled: 0.462; Back Off Enabled: 0.126
  • Pressure Setting 500 mmHg: Back Off Disabled: 0.575; Back Off Enabled: 0.331
  • Pressure Setting 1000 mmHg: Back Off Disabled: 0.839; Back Off Enabled: 0.323

Critical Volume

  • Maximum over-infusion which can occur in the event of a single-fault condition will not exceed 2% of nominal syringe fill volume during loading and 1% of maximum syringe travel after syringe loading.

Flow Rate Range

  • 0.01-9.99 ml/hr in 0.01 ml increments
  • 10-99.9 ml/hr in 0.1 ml increments
  • 100-999 ml/hr in 1 ml increments


  • Width: 4.5″
  • Height: 15″
  • Depth: 7.5″
  • Weight: 4.5 Lbs.

Refurbished The CareFusion Alaris BD 8110 Syringe Pump

Soma Tech Intl offers the Alaris 8110 Syringe Pump up to 50% below OEM prices with the same service and warranty as new. The Alaris Syringe Pump system is not only technically refurbished but also cosmetically refurbished to make it work and look new. When the refurbishing process starts on the Carefusion 8110, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on syringe pumps and infusion pumps. If necessary, parts are replaced to make sure that all aspects of the ventilator are to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Alaris Syringe Pump is working like new it undergoes a special cosmetic restoration process. The Syringe pump is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Alaris BD 8110 syringe pump is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Alaris CareFusion units contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is actively looking to purchase a Carefusion Alaris BD 8110 syringe pump, If you or your facility are looking to sell your Alaris CareFusion system, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned 8110 syringe pumps takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!


Questions about our Infusion Pumps?

Soma Tech Intl offers a wide range of infusion pumps. If you have any questions about any of our infusion pumps or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your infusion pumps? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

Contact Us