Medfusion 2010 Infusion Pump


Home  >  Infusion Pumps

Medfusion 2010 Infusion Pump

Medfusion 2010 Infusion Pump - Soma Technology, Inc.
Other products by Medfusion
Other products in Infusion Pumps

Description  more details

Medfusion 2010 Features

Ambulatory syringe pumps that run on either AC current or rechargeable internal batteries. Accepts a broad range of syringe brands and sizes and it has automatic sensing of syringe size.

  • Ambulatory syringe pumps that run on either AC current or rechargeable internal batteries
  • Accepts a broad range of syringe brands and sizes and it has automatic sensing of syringe size
  • Flow/Rate Range: 0.1-379.0 ML/HR Dependent on Syringe Size Selected
  • Accuracy: Plus or Minus 3%
  • Power Requirements: AC Adapter or internal battery
  • 4.5 in x 3 in x 7.5 in
  • Syringe Size 1-60 ml
  • Alarms: Near Empty, Empty, Volume Limit, Occlusion, Systems Malfunction, Low Battery, Depleted Battery, Syringe Not Loaded,Check Clutch, Invalid Syringe Size. Additional alarms on 2010 & 2010i models: Invalid Number, Alarm Audio Volume, Soft/Loud, Syringe Out and Load Syringe Plunger

Medfusion 2010 Specifications

Flow Rate

  • 0.1 - 378.0 ml/hr., depending on syringe size selected

Volume Limit

  • 00.1 to max. capacity of syringe in increments of 0.1 ml

Volume Delivered

  • (2001) - 000.00 to 999.99 in increments of 0.01 ml (2010) - 0000.0000 to 9999.9999 mg or 0000.00 to 9999.99 ml

Bolus Rate

  • (2010 only) - Up to 378.0 ml/hr

KVO

  • 0.1 - 9.9 ml/hr in increments of 0.1 ml

Occlusion

  • Normal: max. 16.4 PSI with Mono 35cc syringe Low: max. 5.96 PSI with Mono 35cc syringe
  • Middle: max. 13.8 PSI with Mono 35cc syringe High: max. 15.0 PSI with Mono 35cc syringe

Accuracy

  • ± 3 %, excluding variations in syringe accuracies

Battery Capacity

  • 16-hour charge operates the pump for approx. 10 hours at 5.0 ml/hr with a 60-ml syringe

Recharge Time

  • 16 hours maximum
Untitled Document

General Information About IV Therapy

IV Therapy

  • IV therapy is used to deliver by infusion, fluids, medication, or nutrients to patients.
  • There are two main types of administration of infusion, volumetric and syringe/PCA.

IV Therapy-Volumetric

  • These pumps are used when the accuracy of fluid volume to be infused is critical such as in the case of medications used for infusion of drugs for circulatory support.
  • Volumetric pumps deliver a given volume of fluid per unit time measured in mL/hour.
  • Volumetric pumps can be single or multi channel. Both types allow for the administration of more than one fluid at a time. Single channel employs a piggyback method while multi-channel uses separate tubing set up for the administration of multiple medications or fluids

    • IV Therapy-Syringe

  • Syringe pumps are used to administer small volumes of fluids or medications. (1 mL to 60 mL syringe)
  • Syringe pumps are an effective way to deliver medication with precision while reducing the chance of human error if the medication were to be administered by a member of the medical staff* (of course human error can occur when inputting data or choosing dose rate over time)
  • Like volumetric pumps, syringe pumps can be programmed to deliver the medication over a predetermined time