Zimmer ATS 1200 Features
The Zimmer A.T.S. 1200 Tourniquet System provides accurate pressure monitoring for patient safety and confidence. Microprocessor controls and built-in safety features with self-diagnostic tests make monitoring reliable in a single port, dual cuff surgical tourniquet system.
- Large easy to read display
- Rapid inflation and deflation
- Built-in safety features
- Cuff lockout – cuff remains inflated even if power is turned off
- Dual cuffs allow bilateral or Bier Block procedures with critical monitoring
- 45-minute battery backup
- Visual and audio alarms
- Positive locking connectors for leak-free inflation
- Color-coded cuffs in a variety of sizes
- Low profile cuffs
- Lightweight unit is easily used on a table or IV pole
- Self-check calibration each time the machine is turned on
Zimmer ATS 1200 Specifications
Dimensions
- Height: 12.5″ (31.75 cm)
- Width: 10.25: (26 cm)
- Depth: 8.1″ (20.6 cm)
- Weight: 8 lb (3.63 kg)
Power
- Line Voltage Range: 100 – 240 VAC, 50/60 Hz., Auto Switching
- Power Plug: Hospital grade, 3 prongs straight blade, 15 Amp
- Input Power: 53 Watts Typical
- Line Current: 670 mA RMS @ 120 VAC
- Power Cord: Type SJT, AWG 16, 14 ft. (4.27 m)
Battery
- Battery Type: Rechargeable, 12VDC sealed lead acid, 2.3 Amp hours
- Battery Recharge Time: 24 hours (Maximum) Unit should be plugged in 24 hours before initial use
- Battery Discharge Time: The unit will operate on battery power for 45 minutes minimum with fully charged batteries
Pressure
- Maximum Pressure: 475 mmHg cuffs
- Cuff Pressure Range: 50 – 475 mmHg, 5 mmHg increments
- Pressure Regulation: ±6 mmHg of set point
- Pressure Accuracy: ±5 mmHg (50 – 475 mmHg)
