Medtronic Covidien Nellcor PM1000N Bedside Respiratory Patient Monitor

The Medtronic Covidien Nellcor PM1000N beside respiratory patient monitor system incorporates the latest Nellcor digital signal processing and cardiac-based technology for accurate and reliable data readings. The Nellcor PM1000N has an intuitive, easy-to-read, graphical user interface and state-of-the-art color touch screen. It's a portable pulse oximeter intended for prescription use only as a continuous non-invasive monitor of arterial oxygen saturation (SpO2) and pulse rate of adult, pediatric, and neonatal patients during both no motion and motion conditions. It can also be used on patients that are poorly perfused. This monitoring system is intended for use in hospitals, hospital-type facilities, and during intra-hospital transport.

• Modular software, expandable parameters, and easy upgrades.
• State-of-the-art, lightweight and versatile design.
• Multiple connectivity options.
• Nellcor respiration rate technology that delivers Oxygen saturation (SpO2), Pulse Rate, and respiration rate through a single finger sensor.
• Motion-tolerant pulse oximeter.

Dimensions

• Height: 6.5” (16.5 cm)
• Width: 10” (25.4 cm)
• Depth: 5” (12.7 cm)
• Weight: 7.5 lbs (3.4 kg)

Battery

• Type: Lithium-ion
• Battery Capacity: 6 hours under nominal load conditions
• Voltage: 7.2 Volts DC, 11.6 Ah, 83 Wh
• Recharge Time: 8 hours with monitoring system turned off 12 hours with monitoring system turned on
• Shelf Life: Four months, if monitoring system runs on new, fully-charged battery; After four months storage, units run 33% of stated battery life
• Compliance: IEC 62133

Nursing Call Relay

• Maximum Input Voltage: 30 VAC or VDC (polarity is not important)
• Load Current: 120 mA continuous (peak 300 mA @ 100 ms)
• Minimum Resistance: 26.5 ohms to 50.5 ohms (40.5 ohms typical) during alarms
• Ground Reference: Isolated Ground
• Electrical Isolation: 1500 Volts

Performance

• SpO2: 1% to 100%
• Pulse Rate: 20 to 250 beats per minute (bpm)
• Pulse Amplitude: 0.03% to 20%

Accuracy

• Adult - Neonate
• Saturation: (% SpO2 ± 1 SD)
• Adult: 70% to 100% ± 2 digits
• Neonate: 70% to 100% ± 3 digits
• Low perfusion: 70% to 100% ± 2 digits
• Pulse Rate: 20 to 250 bpm ± 3 digits
• Low Perfusion: 20 to 250 bpm ± 3 digits

Power

• Power Requirements: 80-263 VAC, 47/63 Hz, 30 VA power
• Fuse rating: Slow blow 1.5A 250V

Output

• Capability to connect with the Nellcor Oxinet III central monitoring station via wired/wireless Ethernet as well as a wired serial port
• Capability to connect to Philips Vuelink module and Nurse Call via wired serial port
• Capability to download trend data to PC

Optional Accessories

• GCX mounting adapter interface cable

Operating Range and Dissipation

• Red Light Wavelength: Approximately 660 nm
• Infrared Light Wavelength: Approximately 900 nm
• Optical Output Power Less than: 15 mW
• Power Dissipation: 52.5 mW

Environmental

• Operating
• Temperature: 5 ºC to 40 ºC (41 ºF to 104 ºF)
• Altitude: -304.8 m to 4,572 m (-1,000 ft. to 15,000 ft.)
• Atmospheric Pressure: 105 kPa to 57.2 kPa (31.0 in. Hg to 16.89 in. Hg)
• Relative Humidity: 15% to 95% non-condensing
• Transport and Storage
• Temperature: -20 ºC to 60 ºC (-4 ºF to 140 ºF)
• Altitude: -390 m to 5,574 m (-1,254 ft. to 18,288 ft.)
• Atmospheric Pressure: 50 kPa to 106 kPa (14.7 in. Hg to 31.3 in. Hg)
• Relative Humidity: 15% to 95% non-condensing

Product Complaince

• Equipment Classification: IEC/EN 80601-2-61:2011; IEC/EN 60601-1:2005; CAN/CSA C22.2 No. 60601-1:08; ANSI AAMI ES 60601-1:2005
• Protection Type: Class I (Internally powered)
• Degree of Protection: Type BF - Applied part
• Mode of Operation: Continuous
• Electromagnetic Compatibility: IEC 60601-1-2:2007
• Liquid Ingress: IPX1: Protected against harmful effects of dripping water
• Degree of Safety: Not suitable for use in the presence of flammable anesthetics