Steris Medivators DSD Edge Features
The Steris Medivators DSD Edge features two fully independent and asynchronous reprocessing basins designed for use in busy endoscopy facilities. The DSD Edge provides the fastest endoscope turn-around time with a reprocessing cycle as short as 25 minutes. The Edge uses a Rapicide PA high-level disinfectant, a single-use, environmentally friendly peracetic acid, which has a low disinfectant temperature eliminating endoscope cool downtime.
- Fast cycle time for quick endoscope turnaround
- Two basins for simultaneous or independent cycles
- Cycle parameters are continuously monitored
- A leak test ensures endoscope protection throughout the cycle
- Automated alcohol flush and air-dry
- Uses single-use Rapicide PA High-LevelDisinfectant
Medivators DSD Edge Specifications
Dimensions
- Height: 46″ (116.8 cm)
- Height (Lid Open): 64″ (162.6 cm)
- Width: 36 In (91.4 cm)
- Depth: 21 In (53.3 cm)
- Weight: 400 lbs (181.4 kg)
Power
- 120VAC, 60Hz, 1440 watts
Water Supply
- Minimum Flow Rate: 3.2 GPM (12LPM) at 35-40 PSI (2.4 – 2.8 bar)
- Water Temperature: 95° ± 4°F (35°C ± 2°C)
- Water Hardness: Less than 12 gpg (200 ppm)
- Pre-Filter Wall Space: 16″H x 12″W x 6″D (41cm x 31cm x 16cm)
Reservoir Capacities
- Alcohol and Detergent: 27oz each (800 ml)
Disinfectant Temperature Range
- RAPICIDE® PA Disinfectant: 86°F – 104°F (30°C – 40°C)
